ADC

Bind the DNS service to the virtual server

August 20, 2024

Contributed by:

C C S

For the DNS server to respond to DNS requests, the service representing the DNS server must be bound to the DNS virtual server.

Bind the DNS service to the load balancing virtual server by using the CLI

At the command prompt, type the following commands to bind the DNS service to the load balancing virtual server and verify the configuration:

-  bind lb vserver <name> <serviceName>
-  show lb vserver <name>
<!--NeedCopy-->

Example:

> bind lb vserver Vserver-DNS-1 Service-DNS-1
 Done
> show lb vserver Vserver-DNS-1
        Vserver-DNS-1 (0.0.0.0:0) - DNS Type: ADDRESS
        State: DOWN
        Last state change was at Fri Jul  2 10:32:28 2010
        Time since last state change: 0 days, 00:12:16.80
        Effective State: DOWN  ARP:DISABLED
        Client Idle Timeout: 120 sec
        Down state flush: ENABLED
        Disable Primary Vserver On Down : DISABLED
        No. of Bound Services :  1 (Total)       0 (Active)
        Configured Method: LEASTCONNECTION
        Mode: IP
        Persistence: NONE

1) Service-DNS-1 (10.102.29.41: 53) - DNS State: DOWN   Weight: 1
 Done
>
<!--NeedCopy-->

Unbind a DNS service from the load balancing virtual server by using the CLI

Use the unbind lb vserver command instead of bind lb vserver.

Bind/Unbind a DNS service to/from a load balancing virtual server by using the GUI

Navigate to Traffic Management > Load Balancing > Virtual Servers
In the details pane, select the virtual server to/from which you want to bind/unbind the DNS service, and then click Open.
On the Services tab, in the Active column, select/clear the check box next to the Service Name.
Click OK.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Bind the DNS service to the virtual server

August 20, 2024

Contributed by:

C C S

August 20, 2024

Contributed by:

C C S

Bind the DNS service to the virtual server

Bind the DNS service to the load balancing virtual server by using the CLI

Unbind a DNS service from the load balancing virtual server by using the CLI

Bind/Unbind a DNS service to/from a load balancing virtual server by using the GUI

In this article