ADC

Bind a priority queuing policy

August 20, 2024

Contributed by:

C C S

After you create a priority queuing policy, you must bind it to the appropriate virtual server to put it into effect.

Bind a priority queuing policy by using the CLI

At the command prompt, type the following commands to bind a policy and verify the configuration:

-  bind lb vserver <name> -policyName <policyname>
-  show lb vserver <name>
<!--NeedCopy-->

Example:

> bind lb vserver lbvip -policyname pol_cgibin
 Done
> show lb vserver lbvip
        lbvip (8.7.6.6:80) - HTTP       Type: ADDRESS
        State: DOWN
        Last state change was at Wed Jul 15 05:54:24 2009 (+782 ms)
        Time since last state change: 26 days, 05:44:37.370
        Effective State: DOWN
        Client Idle Timeout: 180 sec
        Down state flush: ENABLED
        Disable Primary Vserver On Down : DISABLED
        Port Rewrite : DISABLED
        No. of Bound Services :  0 (Total)       0 (Active)
        Configured Method: LEASTCONNECTION
        Mode: IP
        Persistence: NONE
        Vserver IP and Port insertion: OFF
        Push: DISABLED  Push VServer:
        Push Multi Clients: NO
        Push Label Rule: none

1)      Policy : ns_cmp_msapp Priority:0

1)      Priority Queuing Policy : pol_cgibin
 Done
<!--NeedCopy-->

Bind a priority queuing policy by using the GUI

In the navigation pane, locate and select the virtual server to which you want to bind the priority queuing policy.
- To select a load balancing virtual server, expand Traffic Management > Load Balancing > Virtual Servers, then select the load balancing virtual server that you want..
- To select a content switching virtual server, expand Traffic Management > Content Switching > Virtual Servers, then select the content switching virtual server that you want..
In the Configure Virtual Server dialog box, select the Policies tab.
Click the double right-arrow (») symbol to display the complete list of policy types, and then select Priority Queuing from the drop-down list.
Click Insert Policy.
In the Policy Name row, select the policy that you want to bind from the drop-down list.
ClickOK to save your changes.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Bind a priority queuing policy

August 20, 2024

Contributed by:

C C S

August 20, 2024

Contributed by:

C C S

Bind a priority queuing policy

Bind a priority queuing policy by using the CLI

Bind a priority queuing policy by using the GUI

In this article