Citrix SD-WAN

Routing Domain

May 5, 2021

Contributed by:

S C

Citrix SD-WAN allows segmenting networks for more security and manageability by using the Routing Domain. For example, you can separate guest network traffic from employee traffic, create distinct routing domains to segment large corporate networks, and segment traffic to support multiple customer networks. Each routing domain has its own routing table and enables the support for overlapping IP subnets.

Citrix SD-WAN appliances implement OSPF and BGP routing protocols for the routing domains to control and segment network traffic.

A Virtual Path can communicate using all routing domains regardless of the definition of the access point. This is possible because SD-WAN encapsulation includes the routing domain information for the packet. Therefore, both end networks know where the packet belongs to. It is not necessary to create a WAN Link or an Access Interface for each routing domain.

Following are the list of points to consider when configuring the Routing Domain functionality:

By default, routing domains are enabled on an MCN.
Routing domains are enabled on the Branch sites.
Each enabled routing domain must have a virtual interface and virtual IP associated with it.
Routing selection is part of all the following configurations:
- Interface group
- Virtual IP
- GRE
- WAN Link -> Access Interface
- IPsec tunnels
- Routes
- Rules
Routing domains are exposed in the web interface configuration only when multiple domains are created.
For a Public Internet link, only one primary and secondary access interfaces can be created.
For a Private Intranet/MPLS link, one primary and secondary access interface can be created per routing domain.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Routing Domain

May 5, 2021

Contributed by:

S C

May 5, 2021

Contributed by:

S C

Routing Domain

In this article