NetScaler VPX

Configure a Citrix ADC VPX instance to use PCI passthrough network interface

September 12, 2024

Contributed by:

Overview

After you have installed and configured a Citrix ADC VPX instance on VMware ESX Server, you can use the vSphere Web Client to configure the virtual appliance to use PCI passthrough network interfaces.

The PCI passthrough feature allows a guest virtual machine to directly access physical PCI and PCIe devices connected to a host.

Prerequisites

The firmware version of the Intel XL710 NIC on the host is 5.04.
A PCI passthrough device connected to and configured on the host
Supported NICs:
- Intel X710 10G NIC
- Intel XL710 Dual Port 40G NIC
- Intel XL710 Single Port 40G NIC

Configure passthrough devices on a host

Before configuring a passthrough PCI device on a virtual machine, you must configure it on the host machine. Follow these steps to configure passthrough devices on a host.

Select the host from the Navigator panel of the vSphere Web Client.
Click Manage > Settings > PCI Devices. All available passthrough devices are displayed.
Right-click the device that you want to configure and click Edit.
The Edit PCI Device Availability window appears.
Select the devices to be used for passthrough and click OK.
Restart the host machine.

Configure passthrough devices on a Citrix ADC VPX instance

Follow these steps to configure a passthrough PCI device on a Citrix ADC VPX instance.

Power off the virtual machine.
Right-click the virtual machine and select Edit Settings.
On the Virtual Hardware tab, select PCI Device from the New Device drop-down menu, and click Add.
Expand New PCI device and select the passthrough device to connect to the virtual machine from the drop-down list and click OK.

Note:

VMXNET3 network interface and PCI Passthrough Network Interface cannot coexist.
Power on the guest virtual machine.

You have completed the steps to configuring Citrix ADC VPX to use PCI passthrough network interfaces.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Configure a Citrix ADC VPX instance to use PCI passthrough network interface

September 12, 2024

Contributed by:

September 12, 2024

Contributed by:

Configure a Citrix ADC VPX instance to use PCI passthrough network interface

Overview

Prerequisites

Configure passthrough devices on a host

Configure passthrough devices on a Citrix ADC VPX instance

In this article