NetScaler SDX hardware document history
The following table describes important changes to the NetScaler hardware documentation. To receive notifications about these updates, subscribe to the RSS feed. To subscribe to the NetScaler SDX hardware document history, see NetScaler SDX document history.
Date
Change
Description
19 Feb 2025
Updated the LOM GUI steps
See Obtaining the MAC address, serial number, and host properties of the appliance
23 Aug 2024
Added a link to an article about troubleshooting LOM issues
See Troubleshooting
02 Aug 2024
Updates to the procedure for replacing a RAID-supported SSD
See To replace a RAID-supported SSD
22 Jul 2024
New topic for creating and installing an SSL certificate on SDX 9100 and SDX 16000
See Create and install an SSL certificate on SDX 9100 and SDX 16000
20 Jun 2024
Removed topics for old platforms.
30 May 2024
Updated the LOM version for some platforms and removed platforms that have reached EOL.
See LOM support matrix
12 Jan 2024
Two power supplies are shipped with SDX 9100 for hardware shipped after 13th Dec, 2023
See NetScaler SDX 9100
26 Sep 2023
Added support for updated NIC driver and firmware on NetScaler SDX with 10G/25G/40G NICs
See Fortville NIC firmware upgrade on NetScaler SDX appliances.
13 Sep 2023
Replaced nsroot with nsrecover in the initial configuration using the serial console section
See Initial Configuration through the serial console.
12 Jun 2023
Added a link to transceviers in the landing page
See Hardware form factors
29 May 2023
Updated LOM support matrix for SDX platforms
See LOM support matrix
20 Sep 2022
Support for SDX 16000 platform
See NetScaler SDX 16000
15 Jun 2022
Updated the hardware-software compatability matrix for SDX 9100
See NetScaler SDX hardware-software compatibility matrix
11 Oct 2021
Updated the hardware-software compatability matrix to include 13.1
See NetScaler SDX hardware-software compatibility matrix
15 Jul 2021
New topic about hardware health attributes
See Hardware health attributes of NetScaler SDX appliances
07 Dec 2020
New topic for converting MPX 15000 to SDX 15000
See Convert a NetScaler MPX 15000 appliance to a NetScaler SDX 15000 appliance
01 Aug 2020
Updates for CA password
See Initial configuration
29 Jul 2020
Updated for LA channels on management interfaces
See Initial configuration
22 Jul 2020
Updated for 11.1-65.x support
See Fortville NIC firmware upgrade on NetScaler SDX appliances
24 Jun 2020
Updated for VPX instance to be upgraded before SDX
See Fortville NIC firmware upgrade on NetScaler SDX appliances
16 Jun 2020
Updated for USB port reserved for a future release
Updates to multiple topics
10 Jun 2020
New topic for Fortville NIC firmware upgrade
Fortville NIC firmware upgrade on NetScaler SDX appliances
28 May 2020
Added support for iKVM (HTML5) to access the LOM GUI
See Configure the network settings on the LOM port
09 Apr 2020
Added a note that SDX to MPX conversion is not supported
See Converting a NetScaler MPX appliance to a NetScaler SDX appliance
21 Aug 2019
Added new topics for SDX 15000 and SDX 26000
See SDX 15000 and SDX 26000
23 May 2019
Updated support for release 13.0 on all hardware platforms
See NetScaler SDX hardware-software compatibility matrix