Proxy Server Settings for zero touch deployment
As a prerequisite for Zero Touch Deployment, the Citrix SD-WAN Center should be connected to the internet. If your Citrix SD-WAN Center is connected to the internet through a proxy server, you have to configure the proxy server settings on the Citrix SD-WAN Center.
Note
This proxy server setting is used for Zero Touch Deployment only.
To configure zero touch proxy server settings:
-
In the SD-WAN Center web interface, navigate to Administration > Global Settings > Management Interface.
-
In the Zero Touch Proxy Server Setting section, enter values for the following fields:
- IP Address: The IP address of the proxy server.
- Port: The network port number on which the proxy server accepts connections.
- User Name: The proxy server user name
- Password: The password for the proxy server.
Note
You can leave the User Name and Password field blank if there is no authentication configured on the proxy server.
-
Click Apply, a confirmation dialog box appears.
-
Click Apply.
Note
You can remove the proxy server settings altogether, if the Citrix SD-WAN Center is connected to the internet directly. You can also remove the proxy server settings and configure another proxy server, if required.
To remove proxy server settings:
-
In the Citrix SD-WAN Center web interface, navigate to Administration > Global Settings > Management Interface.
-
In the Zero Touch Proxy Server Setting section, click Remove.
-
Click Remove, a confirmation dialog box appears.
-
Click Remove.