Gateway

Configuring IPv6 for ICA Connections

Citrix Gateway supports IPv6 addresses for ICA connections. Connections with IPv6 to the Web Interface or StoreFront work the same as IPv4 connections. When users connect by using the Citrix Gateway web address, Citrix Gateway proxies the connection to the Web Interface or StoreFront.

You can configure IPv6 for Citrix Gateway deployed in one DMZ or deployed in a double-hop DMZ.

You enable IPv6 on Citrix Gateway by using the command line. You can use the following guidelines:

  • Enable IPv6 on the appliance.

  • Configure subnet IP addresses.

  • Set the DNS resolution order.

  • Set the Web Interface or StoreFront web address.

  • Bind the Secure Ticket Authority (STA) to Citrix Gateway.

By default, the mapped IP address does not support IPv6 addresses. To route user communications to the internal network, you need to create subnet IP addresses and then and configure Citrix Gateway to use the subnet IP addresses.

If you deploy multiple IPv6 subnets in your network, create multiple IPv6 subnet IP address on Citrix Gateway, on for each subnet in your network. Network routing sends the IPv6 packets to the respective subnets by using the subnet IP addresses.

To configure IPv6 for ICA proxy

To configure IPv6 for ICA proxy:

  1. Log on to Citrix Gateway by using a Secure Shell (SSH) connection, such as from PuTTY.

  2. At the command prompt, type enable ns feature IPv6PT. This enables IPv6.

  3. At the command prompt, type enable ns mode USNIP. This enables the use of the subnet IP addresses.

  4. At the command prompt, type: set dns parameter –resolutionOrder AAAAThenAQuery AThenAAAAQuery OnlyAAAAQuery OnlyAQuery

  5. At the command prompt, type: set vpn parameter -wihome http://XD_domain/Citrix/StoreWeb.

Where is either the domain name or IP address of StoreFront.

For example, set vpn parameter -wihome http://storefront.domain.com/Citrix/StoreWeb.

or

set vpn parameter -wihome http://[1000:2000::3000]/Citrix/StoreWeb

If you use the IPv6 address to configure this parameter, the IP address must be contained in brackets.

Configuring IPv6 for ICA Connections