Citrix SD-WAN

Link state propagation

March 12, 2021

Contributed by:

S C

The Link state propagation (LSP) feature allows network administrators to keep the link state of a bypass pair synchronized allowing attached devices on the other side of the link to view when links are inactive. When one port of a bypass pair becomes inactive, the coupled link is de-activated administratively. If your network architecture includes a parallel failover network, this forces traffic to transition to that network. Once the disrupted link is restored, its corresponding link automatically becomes active.

How to configure link state propagation

To configure link state propagation:

Navigate to Configuration Editor > Sites > [Site Name] > Interface Groups.
Expand Virtual Interfaces and under Bridge Pairs, click the LSP checkbox to enable Link State Propagation for a Bridge Pair. Click Apply to save the settings.

Monitoring link statistics

To monitor link statistics:

In the Monitor > Statistics page, choose Ethernet from the Show drop-down menu to view the status of the bypass port pair with Link State Propagation enabled. Observe that the LAN side link is down and later the WAN side link of the bypass pair is administratively DISABLED.
Navigate to Configuration > Appliance Settings > Network Adapters > Ethernet tab. The ports that are administratively down are indicated by a red asterisk (*) in the Ethernet Interface Settings list.

localized image

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Link state propagation

March 12, 2021

Contributed by:

S C

March 12, 2021

Contributed by:

S C

Link state propagation

How to configure link state propagation

Monitoring link statistics

In this article