Gateway

Configuring Address Pools

January 8, 2024

Contributed by:

C S C

You use the configuration utility to configure address pools at the level to which you want to bind the policy. For example, if you want to create an address pool for a virtual server, configure the intranet IP addresses on that node. After you configure the address pool, the policy is bound to the entity where it is configured. You can also create an address pool and bind it globally on Citrix Gateway.

To configure address pools for a user, group, or virtual server

In the configuration utility, in the navigation pane, expand Citrix Gateway, do one of the following:
- Expand Citrix Gateway User Administration and then click AAA Users.
- Expand Citrix Gateway > User Administration and then click AAA Groups.
- Expand Citrix Gateway and then click Virtual Servers.
In the details pane, click a user, group, or virtual server and then click Open.
On the Intranet IPs tab, in IP Address and Netmask, type the IP address and subnet mask and then click Add.
Repeat Step 3 for each IP address you want to add to the pool and then click OK.

To configure address pools globally

In the configuration utility, on the Configuration tab, in the navigation pane, expand Citrix Gateway and then click Global Settings.
In the details pane, under Intranet IPs, click To assign a unique, static IP Address or pool of IP Addresses for use by all client Citrix Gateway sessions, configure Intranet IPs.
In the Bind Intranet IPs dialog box, click Action and then click Insert.
In IP Address and Netmask, type the IP address and subnet mask and then click Add.
Repeat Step 3 and 4 for each IP address you want to add to the pool and then click OK.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Configuring Address Pools

January 8, 2024

Contributed by:

C S C

January 8, 2024

Contributed by:

C S C

Configuring Address Pools

To configure address pools for a user, group, or virtual server

To configure address pools globally

In this article