Citrix SD-WAN Center 11.4

Proxy Server Settings for zero touch deployment

March 12, 2021

Contributed by:

As a prerequisite for Zero Touch Deployment, the Citrix SD-WAN Center should be connected to the internet. If your Citrix SD-WAN Center is connected to the internet through a proxy server, you have to configure the proxy server settings on the Citrix SD-WAN Center.

Note

This proxy server setting is used for Zero Touch Deployment only.

To configure zero touch proxy server settings:

In the SD-WAN Center web interface, navigate to Administration > Global Settings > Management Interface.
In the Zero Touch Proxy Server Setting section, enter values for the following fields:
- IP Address: The IP address of the proxy server.
- Port: The network port number on which the proxy server accepts connections.
- User Name: The proxy server user name
- Password: The password for the proxy server.
Note

You can leave the User Name and Password field blank if there is no authentication configured on the proxy server.
Click Apply, a confirmation dialog box appears.
Click Apply.

Note

You can remove the proxy server settings altogether, if the Citrix SD-WAN Center is connected to the internet directly. You can also remove the proxy server settings and configure another proxy server, if required.

To remove proxy server settings:

In the Citrix SD-WAN Center web interface, navigate to Administration > Global Settings > Management Interface.
In the Zero Touch Proxy Server Setting section, click Remove.
Click Remove, a confirmation dialog box appears.
Click Remove.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

Proxy Server Settings for zero touch deployment

March 12, 2021

Contributed by:

March 12, 2021

Contributed by:

Proxy Server Settings for zero touch deployment

In this article