NetScaler MPX

NetScaler MPX

The following sections describe the hardware installation and initial configuration for all NetScaler hardware platforms.

  • Hardware-software compatibility matrix: Describes the software versions supported on each hardware platform.

  • Hardware platforms: Describes the NetScaler hardware platforms and provides detailed information about each platform and its components.

  • Common hardware components: Describes the hardware components, such as power supplies and ports, that are common to all the platforms.

  • Field replaceable units: Describes the field replaceable units, such as power supply, solid-state drive, hard-disk drive, and direct attach cable, that can be quickly replaced in the field.

  • Preparing for installation: Describes how to unpack the NetScaler appliance and prepare the site and rack for installing the appliance. Lists the cautions and warnings that you must review before you install the appliance.

  • Installing the hardware: Describes the steps to install the rails, mount the hardware, connect the cables, and turn on the appliance.

  • Initial configuration: Describes how to perform the initial configuration of your NetScaler appliance and assign management and network IP addresses.

  • Lights out management port of the NetScaler appliance: Describes the different operations you can perform on your NetScaler appliance by using the lights out management port.

NetScaler MPX

In this article