Hardware health attributes for the MPX 9100 platform
The following table lists the recommended ranges for the health attributes on the MPX 9100 platform.
Run the ipmitool sdr list command from the shell. This command lists the sensory parameters data in detail.
Run the stat system -detail command from the CLI. This command lists a subset of the parameters.
| Health Attribute (shell) | Health Attribute (CLI) | Recommended Range |
|---|---|---|
| CPU Temp | CPU 0 Temperature (Celsius) | 10–95 |
| PCH Temp | Temperature 1 (Celsius) | 10–85 |
| System Temp | Internal Temperature (Celsius) | 10–80 |
| Peripheral Temp | Temperature 0 (Celsius) | 10–80 |
| CPU_VRMIN Temp |
|
10–95 |
| VRMABCD Temp |
|
10–95 |
| VRMEFGH Temp |
|
10–95 |
| DIMMABCD Temp |
|
10–80 |
| DIMMEFGH Temp |
|
10–80 |
| Fan 1 | CPU Fan 0 Speed (RPM) | 1260–18060 |
| Fan 2 | CPU Fan 1 Speed (RPM) | 1260–18060 |
| Fan 3 | System Fan Speed (RPM) | 1260–18060 |
| Fan 4 | System Fan 1 Speed (RPM) | 1260–18060 |
| Fan 5 | System Fan 2 Speed (RPM) | 1260–18060 |
| Fan 6 | Fan 0 Speed (RPM) | 1260–18060 |
| 12V | +12.0 V Supply Voltage | 10.704–13.812 |
| 5VCC | +5.0 V Supply Voltage | 4.466–5.737 |
| 3.3VCC | Main 3.3 V Supply Voltage | 2.885–3.690 |
| VBAT | Battery Voltage (Volts) | 2.591–3.464 |
| 5VSB | 5V Standby Voltage (Volts) | 4.496–5.378 |
| 3.3VSB | Standby 3.3 V Supply Voltage | 2.954–3.552 |
| 1.8V PCH | Voltage 2 (Volts) | 1.618–1.943 |
| PVNN PCH |
|
0.892–1.072 |
| 1.05V PCH |
|
0.915–1.176 |
| 2.5V BMC |
|
2.177–2.804 |
| 1.8V BMC |
|
1.620–1.944 |
| 1.2V BMC |
|
1.074–1.290 |
| 1.0V BMC |
|
0.892–1.072 |
| VcpuVRM |
|
1.616–1.944 |
| Vcpu | CPU 0 Core Voltage (Volts) | 0.931–1.195 |
| VDimmABCD (Volts) | Voltage 0 (Volts) | 1.096–1.344 |
| VDimmEFGH (Volts) | Voltage 1 (Volts) | 1.096–1.344 |
| PS1 Status | Power supply 1 status |
|
| PS2 Status | Power supply 2 status |
|
Notes
-nl- Parameter not listed in the output of the
stat system -detailcommand.-na- Not applicable.
Sample output
The following sections list the different ways to view the system sensor health attributes. The data is a sample representation only. The output from your appliance might be different. For the acceptable ranges, see the previous table.
- From the CLI
- From the shell
- From the LOM GUI
CLI
At the command line, type: stat system -detail
>stat system -detail
NetScaler Executive View
System Information:
Up since Tue Nov 15 13:50:59 2022
Up since(Local) Tue Nov 15 13:50:59 2022
Memory usage (MB) 3562
InUse Memory (%) 6.24
Number of CPUs 9
System Health Statistics (Standard):
CPU 0 Core Voltage (Volts) 1.07
CPU 1 Core Voltage (Volts) 0.00
Main 3.3 V Supply Voltage 3.32
Standby 3.3 V Supply Voltage 3.39
+5.0 V Supply Voltage 5.12
+12.0 V Supply Voltage 12.38
Battery Voltage (Volts) 3.06
Intel CPU Vtt Power(Volts) 0.00
5V Standby Voltage(Volts) 5.13
Voltage Sensor2(Volts) 0.00
CPU Fan 0 Speed (RPM) 9240
CPU Fan 1 Speed (RPM) 9380
System Fan Speed (RPM) 9380
System Fan 1 Speed (RPM) 9100
System Fan 2 Speed (RPM) 9520
CPU 0 Temperature (Celsius) 58
CPU 1 Temperature (Celsius) 0
Internal Temperature (Celsius) 42
Power supply 1 status NORMAL
Power supply 2 status NOT PRESENT
Power supply 3 status NOT SUPPORTED
Power supply 4 status NOT SUPPORTED
System Disk Statistics:
/flash Size (MB) 23801
/flash Used (MB) 3392
/flash Available (MB) 18504
/flash Used (%) 15
/var Size (MB) 341189
/var Used (MB) 12637
/var Available (MB) 301257
/var Used (%) 4
System Health Statistics(Auxiliary):
Voltage 0 (Volts) 1.22
Voltage 1 (Volts) 1.22
Voltage 2 (Volts) 1.85
Voltage 3 (Volts) 0.00
Voltage 4 (Volts) 0.00
Voltage 5 (Volts) 0.00
Voltage 6 (Volts) 0.00
Voltage 7 (Volts) 0.00
Fan 0 Speed (RPM) 9240
Fan 1 Speed (RPM) 0
Fan 2 Speed (RPM) 0
Fan 3 Speed (RPM) 0
Temperature 0 (Celsius) 23
Temperature 1 (Celsius) 33
Temperature 2 (Celsius) 0
Temperature 3 (Celsius) 0
Done
>
<!--NeedCopy-->
Shell
At the command line, type: shell
> shell
root@ns# ipmitool sdr list
CPU Temp | 59 degrees C | ok
PCH Temp | 32 degrees C | ok
System Temp | 42 degrees C | ok
Peripheral Temp | 23 degrees C | ok
CPU_VRMIN Temp | 51 degrees C | ok
VRMABCD Temp | 38 degrees C | ok
VRMEFGH Temp | 40 degrees C | ok
DIMMABCD Temp | 27 degrees C | ok
DIMMEFGH Temp | 30 degrees C | ok
FAN1 | 9380 RPM | ok
FAN2 | 9380 RPM | ok
FAN3 | 9380 RPM | ok
FAN4 | 9240 RPM | ok
FAN5 | 9240 RPM | ok
FAN6 | 9240 RPM | ok
12V | 12.38 Volts | ok
5VCC | 5.12 Volts | ok
3.3VCC | 3.32 Volts | ok
VBAT | 3.06 Volts | ok
5VSB | 5.13 Volts | ok
3.3VSB | 3.39 Volts | ok
1.8V PCH | 1.85 Volts | ok
PVNN PCH | 1.03 Volts | ok
1.05V PCH | 1.06 Volts | ok
2.5V BMC | 2.56 Volts | ok
1.8V BMC | 1.78 Volts | ok
1.2V BMC | 1.18 Volts | ok
1.0V BMC | 0.99 Volts | ok
VcpuVRM | 1.78 Volts | ok
Vcpu | 1.07 Volts | ok
VDimmABCD | 1.22 Volts | ok
VDimmEFGH | 1.22 Volts | ok
PS1 Status | 0x01 | ok
PS2 Status | 0x00 | ok
root@ns#
<!--NeedCopy-->
LOM GUI
- Log on to the LOM GUI.
-
On the Dashboard, click Sensor for temperature and voltage values. Click Fan for fan values.
Hardware health attributes for the MPX 9100 platform
In this article
Copied!
Failed!