Product Documentation
ADC
14.1 - Current Release 13.1 13.0 12.1
View PDF

Deploy a NetScaler VPX instance on Microsoft Azure

November 3, 2023
Contributed by: 
C S

When you deploy a NetScaler VPX instance on Microsoft Azure Resource Manager (ARM), you can use both of the following feature sets to achieve your business needs:

  • Azure cloud computing capabilities
  • NetScaler load balancing and traffic management features

You can deploy NetScaler VPX instances on ARM either as standalone instances or as high availability pairs in active-standby modes.

You can deploy a NetScaler VPX instance on the Microsoft Azure in two ways:

  • Through Azure Marketplace. The NetScaler VPX virtual appliance is available as an image in the Microsoft Azure Marketplace.

  • Using the NetScaler Azure Resource Manager (ARM) json template available on GitHub. For more information, see the GitHub repository for NetScaler solution templates.

The Microsoft Azure stack is an integrated platform of hardware and software that delivers the Microsoft Azure public cloud services in a local data center to let organizations construct hybrid clouds. You can now deploy the NetScaler VPX instances on the Microsoft Azure stack.

Prerequisite

You need some prerequisite knowledge before deploying a NetScaler VPX instance on Azure.

  • Familiarity with Azure terminology and network details. For information, see Azure terminology.

  • Knowledge of a NetScaler appliance. For detailed information the NetScaler appliance, see NetScaler

  • Knowledge of NetScaler networking. See the Networking topic.

How a NetScaler VPX instance works on Azure

In an on-premises deployment, a NetScaler VPX instance requires at least three IP addresses:

  • Management IP address, called NSIP address
  • Subnet IP (SNIP) address for communicating with the server farm
  • Virtual server IP (VIP) address for accepting client requests

For more information, see Network architecture for NetScaler VPX instances on Microsoft Azure.

Note

NetScaler VPX instance supports both the Intel and AMD processors. VPX virtual appliances can be deployed on any instance type that has two or more virtualized cores and more than 2 GB memory. For more information on system requirements, see NetScaler VPX data sheet.

In an Azure deployment, you can provision a NetScaler VPX instance on Azure in three ways:

  • Multi-NIC multi-IP architecture
  • Single NIC multi-IP architecture
  • Single NIC single IP

Depending on your needs, you can use any of these supported architecture types.

Multi-NIC multi-IP architecture

In this deployment type, you can have more than one network interfaces (NICs) attached to a VPX instance. Any NIC can have one or more IP configurations - static or dynamic public and private IP addresses assigned to it.

For more information, see the following use cases:

Note

To avoid MAC moves and interface mutes on Azure environments, Citrix recommends you to create a VLAN per data interface (without tag) of NetScaler VPX instance and bind the primary IP of NIC in Azure. For more information, see CTX224626 article.

Single NIC multi-IP architecture

In this deployment type, one network interfaces (NIC) associated with multiple IP configurations - static or dynamic public and private IP addresses assigned to it. For more information, see the following use cases:

Single NIC single IP

In this deployment type, one network interfaces (NIC) associated with a single IP address, which is used to perform the functions of NSIP, SNIP, and VIP.

For more information, see Configure a NetScaler VPX standalone instance.

Note

The single IP mode is available only in Azure deployments. This mode isn’t available for a NetScaler VPX instance on your premises, on AWS, or in other types of deployment.

NetScaler VPX licensing

A NetScaler VPX instance on Azure requires a license. The following licensing options are available for NetScaler VPX instances running on Azure.

  • Subscription-based licensing: NetScaler VPX appliances are available as paid instances on Azure Marketplace. Subscription-based licensing is a pay-as-you-go option. Users are charged hourly.

    Note

    For subscription-based license instances, your subscription billing applies throughout the license period for a particular license model. Due to cloud restrictions, Azure does not support changing or removing the license model applicable for your subscription. To change or remove a subscription license, delete the existing ADC VM, and recreate a new ADC VM with the required license.

    NetScaler provides technical support for subscription-based license instances. To file a support case, see Support for NetScaler on Azure – Subscription license with hourly price.

  • Bring your own license (BYOL): If you bring your own license (BYOL), see the VPX Licensing Guide at http://support.citrix.com/article/CTX122426. You have to:
    • Use the licensing portal within the NetScaler website to generate a valid license.
    • Upload the license to the instance.

    Note

    In an Azure stack environment, BYOL is the only available licensing option.

  • NetScaler VPX Check-In/Check-Out licensing: For more information, see NetScaler VPX Check-In/Check-Out Licensing.

    Starting with NetScaler release 12.0 56.20, NetScaler VPX Express for on-premises and cloud deployments does not require a license file. For more information on NetScaler VPX Express, see the “NetScaler VPX Express license” section in NetScaler licensing overview.

The following VPX models and license types are available on Azure Marketplace.

VPX model License type Recommended instance    
    VPX 1 NIC/2 NIC VPX 3 NIC VPX upto 8 NIC
VPX10 Standard, Advanced, Premium Standard_D2s_v4 Standard_DS3_v2 Standard_DS4_v2
VPX200 Standard, Advanced, Premium Standard_D2s_v4 Standard_DS3_v2 Standard_DS4_v2
VPX1000 Standard, Advanced, Premium Standard_D4s_v4 Standard_DS3_v2 Standard_DS4_v2
VPX3000 Standard, Advanced, Premium Standard_D4s_v4 Standard_D8ds_v5 Standard_DS4_v2
VPX5000 Standard, Advanced, Premium Standard_D8ds_v5 Standard_D8ds_v5 Standard_DS4_v2
VPX8000 Standard, Advanced, Premium Standard_D8ds_v5 Standard_D8ds_v5 Standard_DS4_v2
VPX10000 Standard, Advanced, Premium Standard_D16s_v4 Standard_D16s_v4 Standard_D16s_v4

Points to note:

  • You must enable Azure accelerated networking on NetScaler VPX instances to get the optimal performance on the following VPX models:
    • VPX1000
    • VPX3000
    • VPX5000
    • VPX8000
    • VPX10000

    For more information on configuring Accelerated networking, see Configure a NetScaler VPX instance to use Azure accelerated networking.

  • The VPX8000 and VPX10000 licenses are available only as BYOL.

  • Regardless of the subscription-based hourly license bought from Azure Marketplace, in rare cases, the NetScaler VPX instance deployed on Azure might come up with a default NetScaler license. This happens due to issues with the Azure Instance Metadata Service (IMDS).

  • Do a warm restart, before making any configuration change on the NetScaler VPX instance, to enable the correct NetScaler VPX license.

IPv6 support for NetScaler VPX instance in Azure

From release 13.1-21.x onwards, NetScaler VPX standalone instance supports IPv6 addresses in Azure. You can configure the IPv6 addresses as VIP and SNIP addresses on NetScaler VPX standalone instance in Azure cloud.

For information on how to enable IPv6 on Azure, see the following Azure documentation:

For information on how the NetScaler appliance supports IPv6, see Internet Protocol version 6.

IPv6 Limitations:

  • IPv6 deployments in NetScaler currently do not support Azure backend autoscaling.
  • IPv6 is not supported for NetScaler VPX HA deployment.

Limitations

Running the NetScaler VPX load-balancing solution on ARM imposes the following limitations:

  • The Azure architecture does not accommodate support for the following NetScaler features:

    • Gratuitous ARP (GARP)
    • L2 Mode
    • Tagged VLAN
    • Dynamic Routing
    • virtual MAC
    • USIP
    • Clustering

    Note:

    With the NetScaler Application Delivery Management (ADM) Autoscale feature (cloud deployment), the ADC instances support clustering on all licenses. For information, see Autoscaling of NetScaler VPX in Microsoft Azure using NetScaler Console.

  • If you expect that you might have to shut down and temporarily deallocate the NetScaler VPX virtual machine at any time, assign a static Internal IP address while creating the virtual machine. If you do not assign a static internal IP address, Azure might assign the virtual machine a different IP address each time it restarts, and the virtual machine might become inaccessible.

  • In an Azure deployment, only the following NetScaler VPX models are supported: VPX 10, VPX 200, VPX 1000, VPX 3000, and VPX 5000. For more information, see the NetScaler VPX Data Sheet.

    If you use a NetScaler VPX instance with a model number higher than VPX 3000, the network throughput might not be the same as specified by the instance’s license. However, other features such as SSL throughput and SSL transactions per second might improve.

  • The deployment ID that is generated by Azure during virtual machine provisioning isn’t visible to the user in ARM. You can’t use the deployment ID to deploy NetScaler VPX appliance on ARM.

  • The NetScaler VPX instance supports 20 Mbps throughput and standard edition features when it’s initialized.

  • The NetScaler VPX instances on Azure with accelerated networking enabled, provides better performance. Azure accelerated networking is supported on NetScaler VPX instances from release 13.0 build 76.x onwards. To enable accelerated networking on NetScaler VPX, Citrix recommends you to use an Azure instance type which supports accelerated networking.

  • For Citrix Virtual Apps and Desktops deployment, a VPN virtual server on a VPX instance can be configured in the following modes:

    • Basic mode, where the ICAOnly VPN virtual server parameter is set to ON. The Basic mode works fully on an unlicensed NetScaler VPX instance.
    • SmartAccess mode, where the ICAOnly VPN virtual server parameter is set to OFF. The SmartAccess mode works for only five NetScaler AAA session users on an unlicensed NetScaler VPX instance.

    Note:

    To configure the SmartControl feature, you must apply a Premium license to the NetScaler VPX instance.

Deploy a NetScaler VPX instance on Microsoft Azure
November 3, 2023
Contributed by: 
C S
November 3, 2023
Contributed by: 
C S

In this article

Site feedback | Privacy and legal terms | Cookie preferences | Consent settings | docs.cloud.com
© 1999- Cloud Software Group, Inc. All rights reserved.