Product Documentation
ADC
14.1 - Current Release 13.1 13.0 12.1
View PDF

Load balance remote desktop protocol servers

May 2, 2023
Contributed by: 
S C

Remote Desktop Protocol (RDP) is a multichannel-capable protocol that allows for separate virtual channels for carrying presentation data, serial device communication, licensing information, highly encrypted data (keyboard and mouse activity), and so on.

RDP is used for providing a GUI to another computer on the network. RDP is used with Windows terminal servers for providing fast access with almost real-time transmission of mouse movements and key presses even over low-bandwidth connections.

When multiple terminal servers are deployed to provide remote desktop services, the NetScaler appliance provides load balancing of the terminal servers (Windows 2003 and 2008 Server Enterprise Editions). Sometimes, a user who is accessing an application remotely may want to leave the application running on the remote machine but shut down the local machine. The user therefore closes the local application without logging out of the remote application. After reconnecting to the remote machine, the user must be able to continue with the remote application. To provide this functionality, the NetScaler RDP implementation honors the routing token (cookie) set by the Terminal Services Session Directory or Broker so that the client can reconnect to the same terminal server to which it was connected previously. The Session Directory, implemented on Windows 2003 Terminal Server, is referred to as Broker on Windows 2008 Terminal Server.

When a TCP connection is established between the client and the load balancing virtual server, the NetScaler applies the specified load balancing method and forwards the request to one of the terminal servers. The terminal server checks the session directory to determine whether the client has a session running on any other terminal server in the domain.

If there is no active session on any other terminal server, the terminal server responds by serving the client request, and the NetScaler appliance forwards the response to the client.

If there is an active session on any other terminal server, the terminal server that receives the request inserts a cookie (referred to as the routing token) with the details of the active session and returns the packets to the NetScaler appliance, which returns the packet to the client. The server closes the connection with the client. When the client retries to connect, the NetScaler reads the cookie information and forwards the packet to the terminal server on which the client has an active session.

The user on the client machine experiences a continuation of the service and does not have to take any specific action.

Note: The Windows Session Directory feature requires the Remote Desktop client that was first released with Windows XP. If a session with a Windows 2000 or Windows NT 4.0 Terminal Server client is disconnected and the client reconnects, the server with which the connection is established is selected by the load balancing algorithm.

The following diagram describes RDP load balancing.

Figure 1. Load Balancing Topology for RDP

RDP topology

Note

  • When an RDP service is configured, persistence is automatically maintained by using a routing token. You need not enable persistence explicitly.
  • The NetScaler appliance supports only IP-based cookies.
  • The nsrdp.pl script is not supported on any current version of Windows servers.

Ensure that the disconnected RDP sessions are cleared on the terminal servers at the back end to avoid flapping between two terminal servers when an RDP session is disconnected without logging out. For more information, see https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2003/cc758177(v=ws.10)#BKMK_2

When you add an RDP service, by default, NetScaler adds a monitor of the type TCP and binds it to the service. The default monitor is a simple TCP monitor that checks whether a listening process exists at the 3389 port on the server specified for the RDP service. If there is a listening process at 3389, NetScaler marks this service as UP and if there is no listening process, it marks the service as DOWN.

For more efficient monitoring of an RDP service, in addition to the default monitor, you can configure a script monitor that is meant for the RDP protocol. When you configure the scripting monitor, the NetScaler opens a TCP connection to the specified server and sends an RDP packet. The monitor marks the service as UP only if it receives a confirmation of the connection from the physical server. Therefore, from the scripting monitor, the NetScaler can know whether the RDP service is ready to service a request.

The monitor is a user-type monitor and the script is located on the NetScaler at /nsconfig/monitors/nsrdp.pl. When you configure the user monitor, the NetScaler runs the script automatically. To configure the scripting monitor, add the monitor and bind it to the RDP service.

To configure RDP load balancing, create services of type RDP and bind them to an RDP virtual server.

To configure RDP load balancing services by using the command line interface

At the command prompt, type the following commands to configure an RDP load balancing setup and verify the configuration:

add service <name>@ <serverName> <serviceType> <port>
<!--NeedCopy-->

Note: Repeat the preceding command to add more services.

Example


> add service ser1 10.102.27.182 RDP 3389
Done
> add service ser2 10.102.27.183 RDP 3389
Done
>show service ser1
ser1 (10.102. 27.182:3389) - RDP
        State: UP
…
            Server Name: 10.102.27.182
            Server ID : 0           Monitor Threshold : 0
        Down state flush: ENABLED
…
1)      Monitor Name: tcp-default
                State: UP       Weight: 1
…
                Response Time: 4.152 millisec
 Done
<!--NeedCopy-->

To configure RDP load balancing services by using the configuration utility

Navigate to Traffic Management > Load Balancing > Services, and create services of type RDP.

To configure an RDP load balancing virtual server by using the command line interface

At the command prompt, type the following commands to configure an RDP load balancing virtual server and verify the configuration:

add lb vserver <name>@ <serviceType> <ipAddress> <port>

bind lb vserver <name>@ <serviceName>

Bind all the RDP services to be load balanced to the virtual server.
<!--NeedCopy-->

Example:

This example has two RDP services bound to the RDP virtual server.


add lb vs v1 rdP 10.102.27.186 3389
Done

bind lb vs v1 ser1
service "ser1" bound

bind lb vs v1 ser2
service "ser2" bound
Done

sh lb vs v1
v1 (10.102.27.186:3389) - RDP   Type: ADDRESS
State: UP
…
No. of Bound Services :  2 (Total)       2 (Active)
Configured Method: LEASTCONNECTION
  Current Method: Round Robin, Reason: A new service is bound
Mode: IP
Persistence: NONE
  L2Conn: OFF

1) ser1 (10.102.27.182: 3389) - RDPState: UP   Weight: 1
2) ser2 (10.102.27.183: 3389) - RDPState: UP   Weight: 1
Done
<!--NeedCopy-->

To configure an RDP load balancing virtual server by using the configuration utility

Navigate to Traffic Management > Load Balancing > Virtual Servers, create a virtual server of type RDP, and bind RDP services to this virtual server.

To configure a scripting monitor for RDP services by using the command line interface

At the command prompt, type the following commands:

add lb monitor <monitorName> USER -scriptName nsrdp.pl

bind lb monitor <monitorName> <rdpServiceName>
<!--NeedCopy-->

Example:

add service ser1 10.102.27.182 RDP 3389

add lb monitor RDP_MON USER -scriptName nsrdp.pl

bind lb monitor RDP_MON ser1

<!--NeedCopy-->

To configure a scripting monitor for RDP services by using the configuration utility

  1. Navigate to Traffic Management > Load Balancing > Monitors, and create a monitor of type USER.
  2. In Special Parameters, in the Script Name list, select nsrdp.pl, and then bind this monitor to an RDP service.
Load balance remote desktop protocol servers
May 2, 2023
Contributed by: 
S C
May 2, 2023
Contributed by: 
S C

In this article

Site feedback | Your privacy choices footer linkYour Privacy Choices | Privacy and legal terms | Cookie preferences | Consent settings | docs.cloud.com
© 1999- Cloud Software Group, Inc. All rights reserved.