Citrix SD-WAN

Viewing Firewall Statistics

March 12, 2021

Contributed by:

S C

Once you have configured firewall and NAT policies, you can view the statistics of the connections, firewall policies and NAT policies as reports. You can filter the reports using the various filtering parameters.

For information on configuring firewall and NAT policies, see Stateful Firewall and NAT Support.

Connections

You can check the statistics for Applications for the Firewall Policy. This enables you to see all connections that match to the selected Application, where they are coming from, where they are going to, and how much traffic they are generating. You can see how the firewall policies are acting on the traffic for each Application.

You can filter the connections statistics using the following parameters:

Application - The application used as filter criteria for the connection.
Family - The application family the used as filter criteria for the connection.
IP Protocol - The IP protocol used by the connection.
Source Zone - The zone from which the connection originated.
Destination Zone - The zone from which responding traffic originates.
Source Service Type - The service from which the connection originated.
Source Service Instance - The instance of the service from which the connection originated.
Source IP - The IP address from which the connection originated, input in dotted decimal notation with an optional subnet mask.
Source Port - The port or range of ports from which the connection originated. A single port or a range of ports using the “-“ character is accepted.
Destination Service Type - The service from which responding traffic originates.
Destination Service Instance - The instance of the service from which responding traffic originates.
Destination IP - The IP address of the responding device, input in dotted decimal notation with an optional subnet mask.
Destination Port - The port or range of ports used by the responding device. A single port or a range of ports using the “-“ character is accepted.

Filter Policies

Policies enable you to specify actions for traffic flows. Group of firewall filters are created using Firewall Policy Templates and can be applied to all sites in the network or only to specific sites.

You can view statistics report for all the filter policies and filter it using the following parameters.

Application object - The Application object used as a filter criteria in the firewall policy.
Application - The application used as a filter criteria in the firewall policy
Family - The application family used as filter criteria in the firewall policy.
IP Protocol - The IP protocol that the filter policy matches.
DSCP: The DSCP tag that the filter policy matches.
Filter Policy Action - The action taken by the policy when a packet matches the filter.
Source Service Type - The service from which the connection originated.
Source Service Name - The instance of the service from which the connection originated.
Source IP - The IP address from which the connection originated, input in dotted decimal notation with an optional subnet mask.
Source Port - The port or range of ports from which the connection originated. A single port or a range of ports using the “-“ character is accepted.
Destination Service Type - The service to which responding traffic is destined.
Destination Service Name - When applicable, the service to which responding traffic is destined.
Destination IP - The IP address of the responding device, input in dotted decimal notation with an optional subnet mask.
Destination Port - The port or range of ports used by the responding device. A single port or a range of ports using the “-“ character is accepted.
Source Zone - The origination zone matched by the filter policy.
Destination Zone - The responding zone matched by the filter policy.

NAT Policies

You can view the statistics of all the Network Address Translation (NAT) policies and filter the report using the following parameters.

IP Protocol - The IP protocol that the NAT policy matches.
NAT Type - The type of NAT in use by the NAT policy.
Dynamic NAT Type - The type of Dynamic NAT in use by the NAT policy.
Service Type - The service type used by the NAT policy.
Service Name - The instance of the service used by the NAT policy.
Inside IP - The inside IP address, input in dotted decimal notation with an optional subnet mask.
Inside Port- The inside port range used by the NAT policy. A single port or a range of ports using the “-“ character is accepted.
Outside IP - The outside IP address, input in dotted decimal notation with an optional subnet mask.
Outside Port - The outside port range used by the NAT policy. A single port or a range of ports using the “-“ character is accepted.

To view Firewall Statistics:

Navigate to Monitoring > Firewall.
In the Statistics field select, Connections, Filter Policies, or NAT Policies as required.
Set the filtering criteria as require.
Click Refresh.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Viewing Firewall Statistics

March 12, 2021

Contributed by:

S C

March 12, 2021

Contributed by:

S C

Viewing Firewall Statistics

Connections

Filter Policies

NAT Policies

In this article