ADC

Configuring owner node response status

August 20, 2024

Contributed by:

C C S

In a cluster setup, on a node has a spotted SNIP address, you can configure the ownerDownResponse option. By default, the option is enabled, allowing the spotted IP address to respond to PING or ARP requests (coming from the upstream router) when the node is inactive. If you disable the option, the IP address cannot respond to the router requests when the owner node is inactive.

To know how this feature is used for monitoring static routes in ECMP deployment, see Using Equal Cost Multiple Path (ECMP) topic.

To set owner node response status by using the Citrix ADC CLI

At the command prompt, type:

add ns ip <IPAddress> \[-ownerNode <positive\_integer>] \[-ownerDownResponse \(YES | NO )] \[-td <positive\_integer>]

Example

add ns ip 2.2.2.2 255.255.255.0 -ownernode 6 –ownerdownResponse YES

To set owner node response status by using the Citrix ADC GUI

Navigate to System > Network > IPs and click Add to create a spotted SNIP address.
On the Create IP Address page, select or clear the ownerDownResponse check box.

To edit owner node response status by using the Citrix ADC GUI

Navigate to System > Network > IPs, select an IP address, and click Edit to select or clear the ownerDownResponse check box.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Configuring owner node response status

August 20, 2024

Contributed by:

C C S

August 20, 2024

Contributed by:

C C S

Configuring owner node response status

To set owner node response status by using the Citrix ADC CLI

Example

To set owner node response status by using the Citrix ADC GUI

To edit owner node response status by using the Citrix ADC GUI

In this article