ADC

Distributing traffic across cluster nodes

August 20, 2024

Contributed by:

C C

After you have created the Citrix ADC cluster and performed the required configurations, you must deploy Equal Cost Multiple Path (ECMP) or cluster Link Aggregation (LA) on the client data plane (for client traffic) or server data plane (for server traffic). These mechanisms distribute external traffic across the cluster nodes.

Policy-based backplane steering

The policy-based backplane steering (PBS) is a mechanism in cluster deployment, which steers the traffic across cluster nodes based on the hash method defined for the flow. The flow is defined by a combination of L2 and L3 parameters similar to the Access Control List (ACL).

The PBS supports both IPv4 and IPv6 traffic. In the case of IPv6 deployments, the steering supports an extra option [dfdprefix <positive_integer>]. This provides the flexibility to choose the same flow processor for the same IP prefix. The prefix option is supported for source IP or destination IP hash methods only.

Note

If the PBS mechanism is not used to steer the traffic, the traffic is steered through the default method.

To configure the new ACL attributes, at the Citrix ADC command prompt, type the following commands:

CLI commands for IPv4

add ns acl <aclname> <aclaction> [-type (classic | dfd)] [-dfdhash <dfdhash>]
set ns acl <aclname> <aclaction> [-dfdhash <dfdhash>
show ns acl [<aclname>][-type (classic | DFD)]
apply ns acls [-type (classic | DFD)]
clear ns acls [-type (classic | DFD)]
renumber ns acls [-type (classic | DFD)]

CLI commands for IPv6

add ns acl6 <acl6name> <acl6action> [-type (classic | dfd)][-dfdhash <dfdhash>][-dfdprefix <positive_interger>]
set ns acl6 <acl6name> <acl6action> [-dfdhash <dfdhash>][-dfdprefix <positive_interger>]
show ns acl6 [<acl6name>][-type (classic | DFD)]
apply ns acls6 [-type (classic | DFD)]
clear ns acls6 [-type (classic | DFD)]
renumber ns acls6 [-type (classic | DFD)]

The following are the different types of hash methods that you can specify to steer the packet to the flow processor:

SIP-SPORT-DIP-DPORT
SIP
DIP
SIP-DIP
SIP-SPORT

Limitations

The traffic flow distribution across the cluster nodes is not ensured, as the flow processor is decided by the admin configured rules.
L2 mode is not supported.
The node groups and striped SNIPs are not supported, as there is no deployment scenarios.
MPTCP is not supported.
Support only for TCP, UDP, and ICMP traffic.
Cluster over L3 mode is not supported.
Process local at service level is not supported.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Distributing traffic across cluster nodes

August 20, 2024

Contributed by:

C C

August 20, 2024

Contributed by:

C C

Distributing traffic across cluster nodes

Policy-based backplane steering

CLI commands for IPv4

CLI commands for IPv6

Limitations

In this article