NetScaler SDX

Consolidation with Dedicated Interfaces for Each Instance

October 5, 2020

Contributed by:

S S C

In the following example, the instances are part of multiple networks. Interface 0/1 is assigned to the Management Service, which is part of the internal 10.1.1.x network. Citrix ADC instances 2 and 3 are part of the 10.1.200.x network (VLAN 100), and Citrix ADC instances 4 and 5 are part of the 10.1.3.x network (VLAN 200).

Optionally, you can configure an NSVLAN on all of the instances.

The following figure illustrates the above use case.

Figure 1. Network topology of an SDX appliance with Citrix ADC instances in multiple networks

topology1

The SDX appliance is connected to a switch. Make sure that VLAN IDs 100 and 200 are configured on the switch port to which port 1/1 on the appliance is connected.

The following table lists the names and values of the parameters used for provisioning Citrix ADC instances 5 and 3 in this example.

Parameter Name	Values for Instance 5	Values for Instance 3
Name	vpx5	vpx3
IP Address	10.1.3.2	10.1.200.2
Netmask	255.255.255.0	255.255.255.240
Gateway	10.1.3.1	10.1.200.1
XVA File	NS-VPX-XEN-10.0-51.308.a_nc.xva	NS-VPX-XEN-10.0-51.308.a_nc.xva
Feature License	Platinum	Platinum
Admin Profile	ns_nsroot_profile	ns_nsroot_profile
User Name	vpx5	vpx3
Password	Sdx	root
Confirm Password	Sdx	root
Shell/Sftp/Scp Access	True	True
Total Memory (MB)	2048	2048
#SSL Chips	1	1
Throughput (Mbps)	1000	1000
Packets per second	1000000	1000000
CPU	Shared	Shared
Interface	1/1 and 10/4	1/1 and 1/5
NSVLAN	200	100
Add (interface)	1/1	1/1
Tagged Interface	Select Tagged	Select Tagged

To provision Citrix ADC instances 5 and 3 as shown in this example

On the Configuration tab, in the navigation pane, expand Citrix ADC Configuration, and then click Instances.
In the Citrix ADC instances pane, click Add.
In the Provision Citrix ADC Wizard follow the instructions in the wizard to set the parameters to the values shown in the above table.
Click Create, and then click Close. The Citrix ADC instance you provisioned appears in the Citrix ADC instances pane.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Consolidation with Dedicated Interfaces for Each Instance

October 5, 2020

Contributed by:

S S C

October 5, 2020

Contributed by:

S S C

Consolidation with Dedicated Interfaces for Each Instance

To provision Citrix ADC instances 5 and 3 as shown in this example

In this article