ADC

Use Case: ECMP with BGP routing

December 21, 2020

Contributed by:

C S

To configure ECMP with BGP routing protocol, perform the following steps:

Log on to the cluster IP address.
Enable BGP routing protocol.
```
> enable ns feature bgp
```

Add VLAN and bind the required interfaces.

> add vlan 985
> bind vlan 985 -ifnum 0/0/1 1/0/1

Add the spotted IP address and bind them to the VLAN.

> add ns ip 10.100.26.14 255.255.255.0 -ownerNode 1 -dynamicRouting ENABLED
> add ns ip 10.100.26.15 255.255.255.0 -ownerNode 2 -dynamicRouting ENABLED
> bind vlan 985 -ipAddress 10.100.26.10 255.255.255.0

Configure BGP routing protocol on ZebOS using the VTYSH shell.

> vtysh conf t router bgp 65535 neighbor 10.100.26.1 remote-as 65535

Configure BGP on the external switch. The following sample configurations are provided for the Cisco® Nexus 7000 C7010 Release 5.2(1) switch. Similar configurations must be performed on other switches.

> router bgp 65535 no synchronization
  bgp log-neighbor-changes neighbor 10.100.26.14 remote-as 65535 neighbor 10.100.26.15 remote-as 65535 no auto-summary
  dont-capability-negotiate
  dont-capability-negotiate
  no dynamic-capability

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

NetScaler Secure Deployment Guide

Use Case: ECMP with BGP routing

December 21, 2020

Contributed by:

C S

December 21, 2020

Contributed by:

C S

Use Case: ECMP with BGP routing

In this article