Gateway

Configuring Citrix Gateway Enabled PCoIP proxy for VMware Horizon View

January 8, 2024

Contributed by:

Prerequisites

Version - Citrix ADC 12.0 or above

Universal License - PCoIP Proxy uses the Clientless Access feature of Citrix Gateway, which means every Citrix Gateway connection must be licensed for Citrix Gateway Universal. On the Citrix Gateway Virtual Server, ensure ICA Only is cleared.

Horizon View infrastructure - A functional internal Horizon View infrastructure. Ensure you are able to connect to Horizon View Agents internally without Citrix Gateway. Ensure that the Horizon View HTTP(S) Secure Tunnel and PCoIP Secure Gateway are not enabled on the View Connection Servers that Citrix ADC will proxy connections to. Following versions of VMware Horizon view are supported.

Connection Server: 7.0.1 and above
Horizon Client: 4.2.0 and above (Windows and Mac)

Firewall Ports:

Ensure the following:

UDP 4172 and TCP 443 must be open from Horizon View Clients to the Citrix Gateway VIP.
UDP 4172 must be open from the Citrix ADC SNIP to all internal Horizon View Agents.
PCoIP Proxy is supported on the Citrix ADC deployed behind NAT. Following are the important points to consider:
- Support is based on VPN virtual server FQDN parameter setting
- Supports only publicly accessible FQDN and not IP
- Supports only 443 and 4172 ports
- Must be a static NAT

Certificate – A valid certificate for the Citrix Gateway Virtual Server.

Authentication – An LDAP authentication policy/server using Classic Syntax.

Unified Gateway (optional) – If Unified Gateway, create the Unified Gateway before adding PCoIP functionality.

RfWebUI Portal Theme – For web browser access to Horizon View, the Citrix Gateway Virtual Server must be configured with RfWebUI theme.

Horizon View Client – The Horizon View Client must be installed on the client device, even if accessing Horizon published icons using the Citrix ADC RfWebUI portal.

To configure Citrix Gateway to support PCoIP proxy for VMWare Horizon View:

Navigate to Configuration > Citrix Gateway Policies > PCoIP.
Create a virtual server profile and a PCoIP profile on the PCoIP Profiles and Connections page.
1. To create a virtual server profile, on the VServer Profiles tab, click Add.
2. Enter a name for the virtual server profile.
3. Enter an Active Directory Domain Name that is used for single sign-on to View Connection Server, and then click Create. Note: Only a single Active Directory domain is supported per Citrix Gateway Virtual Server. Also, the domain name specified here is displayed in the Horizon View Client.
4. Click Login.
5. To create a PCoIP profile, on the Profiles tab, click Add.
  1. Enter a name for the PCoIP profile.
  2. Enter the connection URL for the internal VMware Horizon View Connection Server, and then click Create.
6. Navigate to Configuration > Citrix Gateway > Policies > Session.
7. On the right, select the Session Profiles tab.
8. On the Citrix Gateway Session Policies and Profiles page, create or edit a Citrix Gateway Session Profile.
  1. To create a Citrix Gateway session profile, click Add, and provide a name.
  2. To edit a Citrix Gateway session profile, select the profile, and click Edit.
9. On the Client Experience tab, ensure that the Clientless Access value is set to On.
10. On the Security tab, ensure that the Default Authorization Action value is set to ALLOW.
11. On the PCoIP tab, select the required PCoIP profile, and then click Create. You can also create or edit PCoIP Profiles from this tab.
12. Click Create or OK to finish creating or editing the Session Profile.
13. If you created a Session Profile, then you must also create a corresponding Session Policy.
  1. Navigate to Configuration > Citrix Gateway > Policies > Session.
  2. On the right, select the Session Policies tab.
  3. Click Add, provide a name for the Session Policy, and select the required session profile name from the Profile menu.
  4. If you want to create the Session Policy using Default Syntax, in the Expression area, type “true” (without the quotes), and then click Create. Note: Unified Gateway defaults to Classic Syntax.
  5. If you want to create the Session Policy using Classic Syntax, first click Switch to Classic Syntax. Then in the Expression area, type “ns_true” (without the quotes), and then click Create.
14. Bind the created PCoIP virtual server profile and session policy to a Citrix Gateway Virtual Server.
  1. Go to Citrix Gateway > Virtual Servers.
  2. On the right, either Add a new Citrix Gateway Virtual Server, or Edit an existing Citrix Gateway Virtual Server.
  3. If you are editing an existing Citrix Gateway Virtual Server, in the Basic Settings section, click the pencil icon.
  4. For both adding and editing, in the Basic Settings section, click More.
  5. Use the PCoIP VServer Profile menu to select the required PCoIP virtual server Profile.
  6. Scroll down and ensure that ICA Only is cleared. Then click OK to close the Basic Settings section.
  7. If you are creating a new Citrix Gateway Virtual Server, bind a certificate, and bind an LDAP authentication policy.
  8. Scroll down to the Policies section and click the plus icon.
  9. The Choose Type page defaults to Session and Request. Click Continue.
  10. In the Policy Binding section, click Click to select.
  11. Select the required Session Policy that has the PCoIP Profile configured, and click Select.
  12. In the Policy Binding page, click Bind.
  13. If you want to use a web browser to connect to VMware Horizon View, then on the right, under Advanced Settings, add the Portal Themes section. If you are only using the Horizon View Client to connect to Citrix Gateway, then you don’t must perform this step.
  14. Use the Portal Theme menu to select RfWebUI and click OK.
  15. Horizon View published icons are added to the RfWebUI portal.
Note: VMware uses two or more protocols when using any protocol other than RDP. This can cause the requests to be load balanced across two different back-end servers. You can resolve this issue by setting up a single persistency group across all protocols ensuring all connections remain on the same Citrix virtual server.

Steps to enable USB redirection

USB devices connected to the client machine can be accessed from the virtual desktops and apps. Following are the steps to enable USB redirection:

Log in to VMware Horizon Administrator Console.
Navigate to Inventory > View Configuration Servers.
Select the Connection Servers tab.
Select a listed Connection Server and Click Edit.
Under the General tab, select Use Secure Tunnel connection to machine option under HTTP(S) Secure Tunnel. Provide Citrix Gateway external URL in the External URL field.

Update Content Switching Expression for Unified Gateway

If your Citrix Gateway Virtual Server is behind a Unified Gateway (Content Switching Virtual Server), then you must update the Content Switching Expression to include the PCoIP URL paths.

In the Citrix ADC GUI, navigate to Configuration > Traffic Management > Content Switching > Policies.
Append the following expression under the Expression area, and then click OK.

http.req.url.path.eq(“/broker/xml”)

http.req.url.path.contains(“/broker/resources”)

http.req.url.path.eq(“/pcoip-client”)

Use PCoIP Gateway

To connect, you must have Horizon View Client installed on the client device. Once installed, you can either use the Horizon View Client’s User Interface to connect to Citrix Gateway, or you can use the Citrix Gateway RfWebUI portal page to view the icons published from Horizon.
To view the active PCoIP connections, go to Citrix Gateway > PCoIP.
On the right, switch to the Connections tab. The active sessions are displayed with the following data: user name, Horizon View Client IP, and Horizon View Agent Destination IP.
To terminate a connection, right-click Connection tab, and click Kill Connection. Or click Kill All Connections to terminate all PCoIP connections.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Configuring Citrix Gateway Enabled PCoIP proxy for VMware Horizon View

January 8, 2024

Contributed by:

January 8, 2024

Contributed by:

Configuring Citrix Gateway Enabled PCoIP proxy for VMware Horizon View

Prerequisites

Steps to enable USB redirection

Update Content Switching Expression for Unified Gateway

Use PCoIP Gateway

In this article