NetScaler MPX

Set the LOM password length using the IPMI tool

September 4, 2024

Contributed by:

On NetScaler MPX, you can set different lengths (between 16 and 20 characters) for the LOM password using the IPMI tool. If you create a LOM password by using the LOM GUI, the maximum LOM password length is 20 characters. If you create a LOM password by using the IPMI tool from the host environment, the maximum LOM password length is 19 characters.

To set the LOM password length using the IPMI tool

Log in to the NetScaler shell.
Type ipmitool user set password <userid> <password> <20>

If you don’t type 20 at the end, you cannot log in to the LOM GUI with a password of length greater than 16 characters. You don’t need to type 20 if your password length is fewer than 16 characters. To include special characters in your password, enclose it within double quotation marks.

Examples

Here are some sample commands with output by varying the LOM password length starting with 19 characters and decreasing to 17 characters, which require <20> at the end of the command.

Example#1 - LOM password length = 19

root@ns# ipmitool user set password 2 examplelompassword1 20

Set user password command successful (user 2)

Example#2 - LOM password length = 18

root@ns# ipmitool user set password 2 examplelompassword 20

Set user password command successful (user 2)

Example#3 - LOM password length = 17

root@ns# ipmitool user set password 2 examplelompasswor 20

Set user password command successful (user 2)

Points to note

For MPX 5900, MPX 8900, MPX 14000, and MPX 15000 platforms, the LOM firmware supports a password length of up to 19 characters.
For MPX 9100 and MPX 16000 platforms, the LOM firmware supports a password length of up to 20 characters.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

Set the LOM password length using the IPMI tool

September 4, 2024

Contributed by:

September 4, 2024

Contributed by:

Set the LOM password length using the IPMI tool

To set the LOM password length using the IPMI tool

Examples

Points to note

In this article