NetScaler SDX

NetScaler SDX hardware document history

The following table describes important changes to the NetScaler hardware documentation. To receive notifications about these updates, subscribe to the RSS feed. To subscribe to the NetScaler SDX hardware document history, see NetScaler SDX document history.

Date Change Description
20 Jun 2024 Removed topics for old platforms.  
30 May 2024 Updated the LOM version for some platforms and removed platforms that have reached EOL. See LOM support matrix
12 Jan 2024 Two power supplies are shipped with SDX 9100 for hardware shipped after 13th Dec, 2023 See NetScaler SDX 9100
26 Sep 2023 Added support for updated NIC driver and firmware on NetScaler SDX with 10G/25G/40G NICs See Fortville NIC firmware upgrade on NetScaler SDX appliances.
13 Sep 2023 Replaced nsroot with nsrecover in the initial configuration using the serial console section See Initial Configuration through the serial console.
12 Jun 2023 Added a link to transceviers in the landing page See Hardware form factors
29 May 2023 Updated LOM support matrix for SDX platforms See LOM support matrix
20 Sep 2022 Support for SDX 16000 platform See NetScaler SDX 16000
15 Jun 2022 Updated the hardware-software compatability matrix for SDX 9100 See NetScaler SDX hardware-software compatibility matrix
11 Oct 2021 Updated the hardware-software compatability matrix to include 13.1 See NetScaler SDX hardware-software compatibility matrix
15 Jul 2021 New topic about hardware health attributes See Hardware health attributes of NetScaler SDX appliances
07 Dec 2020 New topic for converting MPX 15000 to SDX 15000 See Convert a NetScaler MPX 15000 appliance to a NetScaler SDX 15000 appliance
01 Aug 2020 Updates for CA password See Initial configuration
29 Jul 2020 Updated for LA channels on management interfaces See Initial configuration
22 Jul 2020 Updated for 11.1-65.x support See Fortville NIC firmware upgrade on NetScaler SDX appliances
24 Jun 2020 Updated for VPX instance to be upgraded before SDX See Fortville NIC firmware upgrade on NetScaler SDX appliances
16 Jun 2020 Updated for USB port reserved for a future release Updates to multiple topics
10 Jun 2020 New topic for Fortville NIC firmware upgrade Fortville NIC firmware upgrade on NetScaler SDX appliances
28 May 2020 Added support for iKVM (HTML5) to access the LOM GUI See Configure the network settings on the LOM port
09 Apr 2020 Added a note that SDX to MPX conversion is not supported See Converting a NetScaler MPX appliance to a NetScaler SDX appliance
21 Aug 2019 Added new topics for SDX 15000 and SDX 26000 See SDX 15000 and SDX 26000
23 May 2019 Updated support for release 13.0 on all hardware platforms See NetScaler SDX hardware-software compatibility matrix
NetScaler SDX hardware document history

In this article