Add intranet subnets

You can specify the authorization and traffic policies for traffic that is bound for the intranet subnets that are configured in your network. The rules for these policies are automatically created by using the parameters you specify for the subnet.

To configure an intranet subnet by using the GUI:

  1. In the navigation pane of the GUI, expand AppExpert, and then click Access Gateway Applications.
  2. In the details pane, do one of the following:
    • To add an intranet subnet, click Intranet Subnets, and then click Add.
    • To modify an intranet subnet, click an intranet subnet, and then click Open.
  3. In the Create Intranet Subnet or Configure Intranet Subnet dialog box, do the following:
    1. In the Name box, type a name for the intranet subnet you are adding. This parameter cannot be changed for an existing intranet subnet.
    2. In the IP Address box, type the IP address of the intranet subnet.
    3. In the Netmask box, type the netmask that will be used for the intranet subnet.
    4. Click Create or OK, and then click Close.
Add intranet subnets

In this article