Gateway

Configure the appliance to communicate with the appliance proxy

January 8, 2024

Contributed by:

When you deploy NetScaler Gateway in a double-hop DMZ, you must configure NetScaler Gateway in the first DMZ to communicate with the NetScaler Gateway proxy in the second DMZ.

If you deploy multiple appliances in the second DMZ, you configure each appliance in the first DMZ to communicate with every proxy appliance in the second DMZ.

Note: If you want to use IPv6, you configure the next hop server by using the configuration utility. To do so, expand NetScaler Gateway > Resources and then click Next Hop Servers. Follow the steps in the following procedure and then select the IPv6 check box.

To configure NetScaler Gateway to communicate with the NetScaler Gateway Proxy

In the configuration utility, on the Configuration tab, expand NetScaler Gateway > Resources and then click Next Hop Servers.
In the details pane, click Add.
In Name, type a name for the first NetScaler Gateway.
In IP address, type the virtual server IP address of the NetScaler Gateway proxy in the second DMZ.
In Port, type the port number, click Create and then click Close. If you are using a secure port, such as 443, select Secure.

You must configure each NetScaler Gateway installed in the first DMZ to communicate with all NetScaler Gateway proxy appliances installed in the second DMZ.

After you configure the settings for the NetScaler Gateway proxy, bind the policy to Next Hop Servers in NetScaler Gateway Global or to a virtual server.

To bind the NetScaler Gateway next hop server globally

In the configuration utility, on the Configuration tab, expand NetScaler Gateway > Resources and then click Next Hop Servers.
In the details pane, select a next hop server and then in Action, select Global Bindings.
In the Configure Next Hop Server Global Binding dialog box, in Next Hop Server Name, select the proxy appliance and then click OK.

To bind the NetScaler Gateway next hop server to a virtual server

In the configuration utility, on the Configuration tab, expand NetScaler Gateway and then click Virtual Servers.
In the details pane, select a virtual server and then click Open.
On the Published Applications tab, under Next Hop Servers, click an item and then click OK.

You can also add a next hop server from the Published Applications tab.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

Configure the appliance to communicate with the appliance proxy

January 8, 2024

Contributed by:

January 8, 2024

Contributed by:

Configure the appliance to communicate with the appliance proxy

To configure NetScaler Gateway to communicate with the NetScaler Gateway Proxy

To bind the NetScaler Gateway next hop server globally

To bind the NetScaler Gateway next hop server to a virtual server

In this article