Gateway

Validating the Server Certificate During an SSL Handshake

January 8, 2024

Contributed by:

The NetScaler Gateway appliance can now be configured to validate the server certificate provided by the back-end server during an SSL handshake.

To configure NetScaler Gateway global parameters to support PAC for outbound proxy by using the configuration utility

Bind the CA certificate

Navigate to Configuration > NetScaler Gateway > NetScaler Gateway Policy Manager > Certificate Bindings.**
On the Certificate Bindings screen, click the + icon.
On the CA Certificate(s) Binding screen, click Add Binding and click Install.
Select the certificate file name in the Certificate File Name field and click Install.
On the CA Certificate(s) Binding screen, select the certificate and click Bind.
Click Done.

Enabling the certificate validation:

Navigate to NetScaler Gateway> Global settings.
Click Change Global Settings.**
Select Enabled from the Backend Server Certificate Validation drop-down menu and click OK.

To configure NetScaler Gateway global parameters to support server certificate with the command line

At the command prompt, type the following commands:

    bind vpn global cacert DNPGCA1

    set vpn parameter backendcertValidation ENABLED
<!--NeedCopy-->

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

Validating the Server Certificate During an SSL Handshake

January 8, 2024

Contributed by:

January 8, 2024

Contributed by:

Validating the Server Certificate During an SSL Handshake

In this article