ADC

Enable NetScaler Web App Firewall

January 9, 2024

Contributed by:

B S

Before you can create a security configuration, you must enable the NetScaler Web App Firewall feature on the appliance.

Points to remember

If you are configuring a dedicated NetScaler Web App Firewall appliance or upgrading an existing appliance, the feature is already enabled. You do not have to perform either of the procedures described here.
If you have a new NetScaler or VPX, you must enable the NetScaler Web App Firewall feature before you configure it.
If you are upgrading a NetScaler or VPX from a previous version, you must first enable the NetScaler Web App Firewall feature before you configure it.

Note:

If you are upgrading a NetScaler or VPX from a previous version, you might need to update the licenses on your appliance before you enable NetScaler Web App Firewall. Check with your NetScaler representative or reseller to obtain the correct license.

Enable NetScaler Web App Firewall by using the command interface

At the command prompt, type the following command:

enable ns feature AppFW

Enable the Web App Firewall by using the GUI

Navigate to System > Settings.
In the details pane, click Configure Advanced Features.
In the Configure Advanced Features page, select NetScaler Web App Firewall.
Click OK.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

Enable NetScaler Web App Firewall

January 9, 2024

Contributed by:

B S

January 9, 2024

Contributed by:

B S

Enable NetScaler Web App Firewall

Points to remember

Enable NetScaler Web App Firewall by using the command interface

Enable the Web App Firewall by using the GUI

In this article