Citrix SD-WAN

Setup Master Control Node

March 12, 2021

Contributed by:

S C

The SD-WAN Master Control Node (MCN) is the head end appliance in the Virtual WAN. Typically, this is a 4000 or 5100 Virtual WAN appliance deployed at the Enterprise data center. The MCN serves as the distribution point for the initial system configuration and any subsequent configuration changes. In addition, you conduct most upgrade procedures through the Management Web Interface on the MCN. There can be only one active MCN in a Virtual WAN.

By default, appliances have the pre-assigned role of client. To establish an appliance as the MCN, you must first add and configure the MCN site, and then stage and activate the configuration and appropriate software package on the designated MCN appliance.

Supplemental MCN Site Deployment Information

The following Knowledge Base support articles are recommended:

Virtual WAN PBR Mode Deployment Steps (CTX201577)

http://support.citrix.com/article/CTX201577
Virtual WAN Gateway Mode Deployment Steps (CTX201576)

http://support.citrix.com/article/CTX201576

Overview of MCN Site Configuration Procedures

The steps for adding and configuring the MCN site are as follows:

Switch the Management Web Interface to MCN Console mode.
Add the MCN site.
Configure the Virtual Interface Groups for the MCN site.
Configure the Virtual IP Addresses for the MCN site.
(Optional) Configure the LAN GRE Tunnels for the site.
Configure the WAN links for the MCN site.
Configure the Access Interfaces for the MCN site.
Configure the routes for the MCN site.
(Optional) Configure High Availability for the MCN site.
(Optional) Configure Virtual WAN security and encryption.
Name and save the MCN site configuration.

Instructions for each of these tasks are provided in the following sections.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Setup Master Control Node

March 12, 2021

Contributed by:

S C

March 12, 2021

Contributed by:

S C

Setup Master Control Node

Supplemental MCN Site Deployment Information

Overview of MCN Site Configuration Procedures

In this article