Set date and time

March 12, 2021

Contributed by:

S C

Before installing the SD-WAN software license on an appliance, you must set the date and time on the appliance.

Note

You need to repeat this process for each appliance you want to add to your network.

To set the date and time, do the following:

Log into the Management Web Interface on the appliance you are configuring.
In the main menu bar, select the Configuration tab.

This displays the Configuration navigation tree in the left pane of the screen.
Open the System Maintenance branch in the navigation tree.
Under the System Maintenance branch, select Date/Time Settings. This displays the Date/Time Settings page, as following.
Select the time zone from the Time Zone field drop-down menu at the bottom of the page.

Note

If you have to change the time zone setting, you must do this before setting the date and time, or your settings do not persist as entered.
Click Change Timezone. This updates the time zone and recalculates the current date and time setting, accordingly. If you set the correct date and time before this step, then your settings are no longer correct. When the time zone update completes, a success Alert icon (green check mark) and status message displays in the top section of the page.
(Optional) Enable NTP Server service.
1. Select Use NTP Server.
2. Enter the server address in the Server Address field.
3. Click Change Settings. A success Alert icon (green checkmark) and status message displays when the update completes.
Select the month, day, and year from the Date field drop-down menus.
Select the hour, minutes, and seconds from the Time field drop-down menus.
Click Change Date.

Note:

This updates the date and time setting, but does not display a success Alert icon or status message.

The next step is to set the console session Timeout threshold to the maximum value. This step is optional, but recommended. This prevents the session from terminating prematurely while you are working on the configuration, which could result in a loss of work. Instructions for setting the console session Timeout value are provided in the following section. If you do not want to reset the timeout threshold, you can proceed directly to the section, Uploading and Installing the SD-WAN Software License File.

Warning

If your console session times out or you log out of the Management Web Interface before saving your configuration, any unsaved configuration changes are lost. Log back into the system, and repeat the configuration procedure from the beginning.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Set date and time

March 12, 2021

Contributed by:

S C

March 12, 2021

Contributed by:

S C

Set date and time

In this article