Citrix SD-WAN

Checklist and how to deploy

March 12, 2021

Contributed by:

S C

For information on Virtual WAN concepts and guidelines for planning your deployment, see Citrix Virtual WAN Deployment Planning Guide.

Prepare for deployment

The following list outlines the steps and procedures involved in deploying the SD-WAN Standard and Premium Editions.

To view some of the deploement use cases, see Deployments.

Gather your Citrix SD-WAN deployment information.
Set up the Citrix SD-WAN appliances.
- For each hardware appliance you want to add to your SD-WAN deployment, you must complete the following tasks:
  - Set up the appliance hardware.
  - Set the Management IP Address for the appliance and verify the connection.
  - Set the date and time on the appliance.
  - (Optional) Set the console session Timeout interval to a high or the maximum value.
Upload and install the software license file on the appliance.

Installation and configuration checklist

Gather the following information for each SD-WAN site you want to deploy:

The licensing information for your product
Required Network IP Addresses for each appliance to be deployed:
- Management IP Address
- Virtual IP Addresses
- Site Name
- Appliance Name (one per site)
- SD-WAN Appliance Model (for each appliance to be deployed)
- Deployment Mode (MCN or Client)
- Topology
- Gateway MPLS
- GRE Tunnel information
- Routes
- VLANs
- Bandwidth at each site for each circuit

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Checklist and how to deploy

March 12, 2021

Contributed by:

S C

March 12, 2021

Contributed by:

S C

Checklist and how to deploy

Prepare for deployment

Installation and configuration checklist

In this article