ADC

Use case: Deployment of IP address based GSLB service group

August 20, 2024

Contributed by:

C C

Tip

For information about the GSLB service groups, see Configuring a GSLB Service Group.

Deployment scenario

If there are multiple applications hosted on the same application server, the GSLB should probe these applications to see if the applications are responding or not. If an application is not responding, the user must be directed to the server on which the application is UP. Also, if one of the applications is DOWN, then the server should not be marked DOWN, because the other applications are UP.

In the following example, multiple applications (HTTPS) are hosted on one server in each GSLB site and hence all these applications resolve to one IP address of the respective site.

Using the GSLB service groups, you can have the same server with an IP address and port bound to multiple service groups where each service group represents a different application.

An application specific monitor is bound to the service groups that marks the service group as DOWN if the application is DOWN. Thus, whenever an application is DOWN, only that application is taken out from the setup and not the server.

add gslb serviceGroup app1_site1 HTTP -maxClient 0 -cip DISABLED -cltTimeout 180 -svrTimeout 360 -siteName s1

add gslb serviceGroup app2_site1 HTTP -maxClient 0 -cip DISABLED -cltTimeout 180 -svrTimeout 360 -siteName s1

add gslb serviceGroup app1_site2 HTTP -maxClient 0 -cip DISABLED -cltTimeout 180 -svrTimeout 360 -siteName s2

add gslb serviceGroup app2_site2 HTTP -maxClient 0 -cip DISABLED -cltTimeout 180 -svrTimeout 360 -siteName s2

add lb monitor http_app2 HTTP -respCode 200 -httpRequest "GET /testsite/app2.html"

add lb monitor http_app1 HTTP -respCode 200 -httpRequest "GET /testsite/app1.html"

bind gslb serviceGroup app1_site1 192.0.2.140 80

bind gslb serviceGroup app1_site1 -monitorName http_app1

bind gslb serviceGroup app2_site1 192.0.2.140 80

bind gslb serviceGroup app2_site1 -monitorName http_app2

bind gslb serviceGroup app1_site2 192.0.2.142 80

bind gslb serviceGroup app1_site2 -monitorName http_app1

bind gslb serviceGroup app2_site2 192.0.2.142 80

bind gslb serviceGroup app2_site2 -monitorName http_app2

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Use case: Deployment of IP address based GSLB service group

August 20, 2024

Contributed by:

C C

August 20, 2024

Contributed by:

C C

Use case: Deployment of IP address based GSLB service group

Deployment scenario

In this article