ADC

Configure GSLB for DNS queries with NAPTR records

August 20, 2024

Contributed by:

C C S

In a typical Global Server Load Balancing (GSLB) deployment, the Citrix ADC appliance receives DNS queries for A/AAAA records, selects the most appropriate GSLB service according to the configured load balancing method, and returns the service’s IP address as a reply to the DNS query. You can now configure the appliance to receive DNS queries for NAPTR records and respond with the list of services configured for a domain. The appliance also monitors the health of the services, and in the response it provides a list of only the services that are up.

Example:

In Telco deployments, you can configure a Citrix ADC appliance to receive DNS queries with NAPTR records from clients such as mobile management entities (MMEs), which play the role of a DNS resolver to discover all the services that are offered by the domain name. The appliance responds to the query with NAPTR records for all the services that are up. The MME can use this NAPTR response to run the S-NAPTR procedure to select the nodes on the basis of the service offered, colocation, topological closeness, and so on.

If multiple nodes qualify for selection, the MME can use the preference field in the NAPTR record from the Citrix ADC appliance to determine the node.

NAPTR Record Format

While responding to a DNS query with NAPTR record, a Citrix ADC appliance constructs a response NAPTR record for each GSLB service.

The following table lists the files in the NAPTR record:

Field
Domain	The GSLB domain
TTL	The amount of time for which the NAPTR record can be cached.
Class	The class of the record. By default, this value is set to IN.
Type	The DNS record type.
Order	Specifies the order in which the NAPTR record MUST be processed. You can specify the order in the GSLB service. Otherwise, it is set to 1.
Preference	Specifies the order in which NAPTR records with equal “order” values SHOULD be processed, low numbers being processed before high numbers. If the order is not specified in the GSLB service, it is set to 1.
Flags	Controls the aspects of the rewriting and interpretation of the fields in the record. The Citrix ADC appliance sets this value to A.
Service	Specifies the available service(s).
Regular Expression	Regular expressions are not supported, so this value is set to NULL.
Replacement	The domain name of the node that hosts the services.

Configuration procedure

For detailed GSLB configuration instructions, see Configuring Global Server Load Balancing (GSLB). Make sure that you do the following:

Set the following parameters while adding the GSLB virtual server:
- serviceType: ANY
- dnsRecordType: NAPTR
- lbMethod: CUSTOMLOAD

Example:

add gslb vserver gslb_vs ANY -dnsRecordType NAPTR -lbMethod CUSTOMLOAD
<!--NeedCopy-->

While adding a GSLB site, set the naptrReplacementSuffix parameter to the domain name that you want to embed in the NAPTR records.

Example:

add gslb site site1 10.102.218.200  -naptrReplacementSuffix example.com
<!--NeedCopy-->

Set the following parameters while adding the GSLB service:
- naptrreplacement
- naptrOrder
- naptrServices
- naptrDomainTTL
- naptrPreference

Sample configuration

add gslb vserver gslb_vs ANY -dnsRecordType NAPTR -lbMethod CUSTOMLOAD

Done

add gslb site site1 10.102.218.200  -naptrReplacementSuffix example.com

Done

add gslb service sgw1 3.3.3.13 ANY *  -siteName site1 -naptrreplacement sgw1.site1. -naptrOrder 2 -naptrServices x-3gpp-sgw:x-s5-gtp -naptrDomainTTL 20 -naptrPreference   200

Done

add gslb service sgw2 3.3.3.11 ANY *  -siteName site1 -naptrreplacement sgw2.site1. -naptrOrder 5 -naptrServices x-3gpp-sgw:x-s5-gtp  -naptrDomainTTL 20  naptrPreference  100

Done

add gslb service sgw3 3.3.3.12 ANY *  -siteName site2 -naptrreplacement sgw3.site1. -naptrOrder 10 -naptrServices x-3gpp-sgw:x-s5-gtp  -naptrDomainTTL 20 naptrPreference   300

bind gslb vserver gslb_vs -serviceName sgw1

Done

bind gslb vserver gslb_vs -serviceName sgw2

Done

bind gslb vserver gslb_vs -serviceName sgw3

Done

bind gslb service sgw1 -monitorName ping

Done

bind gslb service sgw2 -monitorName ping

Done

bind gslb service sgw3 -monitorName ping

Done

bind gslb vserver gslb_vs -domainName gslb.com -TTL 5

Done
<!--NeedCopy-->

Note

DNS queries with NAPTR records are not supported in parent-child configuration.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Configure GSLB for DNS queries with NAPTR records

August 20, 2024

Contributed by:

C C S

August 20, 2024

Contributed by:

C C S

Configure GSLB for DNS queries with NAPTR records

NAPTR Record Format

Configuration procedure

Sample configuration

In this article