Citrix SD-WAN 2100 SE
The Citrix SD-WAN 2100-SE platform is a 1U appliance with 8 core processor and 32 GB (GB) of memory.
The following figure shows the front panel of the SD-WAN 2100-SE appliance.
Figure 1. Citrix SD-WAN 2100-SE appliance, front panel
SD-WAN 2100-SE appliance has the following ports:
- An RS232 serial console port.
- 10/100/1000 Base-T copper Ethernet management port (RJ45) called the Lights out Management (LOM) port labeled LOM, and management port labeled 0/1. You can use these ports to remotely monitor and manage the appliance independently of the appliance’s software.
- USB ports.
- Four 1000 Base-TX copper Ethernet ports (fail-to-wire).
- Four 1GE SFP ports.
| Port Labels - old 2100-SE Front Bezel | Description |
|---|---|
| LOM | Lights out management Port |
| 0/1 | Management Port |
| Port Labels - new 2100-SE Front Bezel | Description |
|---|---|
| LOM 0/1 | Lights out management and Management Port |
| 0/2 | Management port that is reserved for future use (Management) |
- A copper Ethernet (RJ45) Port called the Lights out Management (LOM) port labeled lights out management and 0/1. You can use this port to remotely monitor and manage the appliance independently of the appliance’s software.
- A copper Ethernet (RJ45) management port, labeled 0/2. This management port cannot be used for system administration functions. This port is reserved for future use.
Figure 2. Citrix SD-WAN 2100-SE appliance, back panel
The following components are visible on the back panel of the SD-WAN 2100-SE appliance:
- 240 GB removable solid-state drive and 1 blank slot.
- Power switch, which switches power to the appliance on or off. Press the switch for five seconds to switch off the power.
- Non-maskable interrupt (NMI) button, for use at the request of Technical Support to produce a core dump. Use a pen, pencil, or other pointed object to press the red button, which is required to prevent unintentional activation.
- Single power supply, rated at 450 watts, 100–240 volts.
Convert 2100 SE Appliance to 2100 PE Appliance
Important
To use PE functionality, the 2100 appliance needs to have SD-WAN release 9.3 or higher software version. The SD-WAN release 9.3 and higher software release versions support 2100 PE.
- 2100 SE ships with only one SSD (240 GB) and one blank carrier.
- If you want to upgrade to a PE appliance, you can order the kit. The kit includes an extra SSD (480 GB) and appropriate license for PE.
- Upon receiving the kit, install the new 480 GB drive in the empty slot (leaving original SSD as is). Upgrade to SD-WAN release 10.0, and apply new PE license.
Note
You can also convert a 2100 SE appliance to 2100 PE appliance using the USB reimage utility.
Insert Solid State Drive (SSD)
- Insert the required SSD in the standard edition appliance. For instructions about how to insert SSD, see Solid State Drive (Field Replaceable Unit).
- 2100 SE appliance requires 480 GB or more SSD.
- 2100 SE appliance requires 480 GB or more SSD.
- Restart the appliance through the SD-WAN web management interface.
- Ensure that the software release version installed on the appliance is SD-WAN release version 10.0.
- Install the Enterprise Edition platform license. For license information, see the Citrix SD-WAN product downloads.
- Upgrade the network to software release version 10.0 or later.
Configure Management IP address using serial Console
- Access serial console of the appliance.
- Log in using admin as the username and the serial number of the SD-WAN appliance as the password.
- Type the ssh admin@169.254.0.60 -l administrator command.
- Type password: password.
- Type the management_ip command.
- Type the set interface 192.168.100.1 255.255.255.0 192.168.100.254 command.
- Type the apply command.
Citrix SD-WAN 2100 SE
Copied!
Failed!