Citrix SD-WAN Platforms

Citrix SD-WAN 410 SE

June 25, 2020

Contributed by:

S C

The SD-WAN 410 SE platform has a dual-core processor and 8 GB of memory. This platform has a bandwidth of up to 150 Mbps.

The following figure shows the front panel of an SD-WAN 410 SE appliance.

localized image

The power button switches main power (the power to the power supply) on or off. Press the switch for two seconds to turn off the power.

The reset button restarts the appliance.

apA, apB, and apC -Indicate network activity on the LAN and WAN ports.
Bypass port— Indicates the status of the third pair of bypass ports.
Power— When blinking, indicates that the appliance is doing factory reset.

The LEDs provide critical information about different parts of the appliance.

Power indicator —Indicates that a power supply unit has failed.
Information LED—Indicates the following:

Status	Description
Continuously on orange	Data ports are in bypass mode (FTW)
Continuously ON and red.	The appliance is overheated. (This might be a result of cable congestion.)
Slow blink - 1 blink per second	Fan failure.
Fast blink- 4 blinks per second	Power failure.
Solid blue	Local UID has been activated. Use this function to locate the server in a rack mount environment.
Fast blink - 3–4 blinks per second	Remote UID is on. Use this function to identify the server from a remote location.
Solid Green	Appliance is operational.

Note

The terms FTW and bypass are inter-exchangeable. The bypass port is the FTW port.

localized image

The above figure shows the back panel of an SD-WAN 410 SE appliance.

The following components are visible on the back panel of an SD-WAN 410 SE appliance:

Cooling fan - This platform is intended for use in a branch typically desktop mounted with ambient air temperature.
Single power supply, rated at 200 watts, 110–240 volts. Power supply has an LED that indicates the status of the power supply, as described in hardware-common-components-con1.html
One RJ45 management port.
One RJ45 console port.
6X1 GigE Copper (1000BASE-TX).
VGA port.
Two USB ports.

For information about installing the rails, rack mounting the hardware, and connecting the cables, see “Installing the Hardware.”

For information about performing initial configuration of your appliance, see “Initial Configuration.”

Port labeling for SD-WAN 410

All data ports are labeled in the order they are enumerated by the Operating System. The ports use odd port numbers for LAN ports and even port numbers for WAN ports. 1/1 is used for the first LAN port, 1/2 for the first WAN port, 1/3 for the second LAN Port, 1/4 for the second WAN port, 1/5 for the third LAN Port, and 1/6 for the third WAN Port.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

Citrix SD-WAN 410 SE

June 25, 2020

Contributed by:

S C

June 25, 2020

Contributed by:

S C

Citrix SD-WAN 410 SE

Port labeling for SD-WAN 410

In this article