Citrix SD-WAN Platforms

SD-WAN 1000 Appliance with Windows Server

May 23, 2019

Contributed by:

The Citrix SD-WAN 1000 with Windows Server platform has a quad-core processor and 32 GB of memory. This platform has a bandwidth of up to 20 Mbps.

The following figure shows the front panel of a SD-WAN 1000 appliance with Windows Server.

Figure 1. Citrix SD-WAN 1000 with Windows Server, front panel

localized image

The front panel of the SD-WAN 1000 with Windows Server appliance has a power button and five LEDs.

The power button is used to switch the appliance on or off.

The reset button restarts the appliance.

The LEDs provide critical information related to different parts of the appliance.

Power Fail – Indicates the power supply unit has failed.
Information LED – Indicates the following: | Status | Description | |—|—| | Continuously ON and red | The appliance is overheated. (This might be a result of cable congestion.) | | Blinking red (1Hz) | Fan failure, check for an inoperative fan. | | Blinking red (0.25Hz) | Power failure, check for the non-operational power supply. | | Solid blue | Local UID has been activated. Use this function to locate the server in a rack mount environment. | | Blinking blue (300 m/s) | Remote UID is on. Use this function to identify the server from a remote location. |
NIC1 and NIC2 – Indicate network activity on the LAN1 and WAN1 ports.
HDD – Indicates the status of the hard disk drive.
Power – Indicates that the power supply units are receiving power and operating normally.

The following figure shows the back panel of a SD-WAN 1000 appliance with Windows Server.

Figure 2. Citrix SD-WAN 1000 appliance with Windows Server , back panel

localized image

The following components are visible on the back panel of a SD-WAN 1000 appliance with Windows Server:

Cooling fan
Single power supply, rated at 200 watts, 110-240 volts
Accelerated pairs of Ethernet ports (apA and apB) which function as accelerated bridges
RS-232 serial console port
One AUX Ethernet port and one management port
Two USB ports

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

SD-WAN 1000 Appliance with Windows Server

May 23, 2019

Contributed by:

May 23, 2019

Contributed by:

SD-WAN 1000 Appliance with Windows Server

In this article