6100 Standard Edition and Premium Edition appliance
The Citrix SD-WAN 6100 Standard Edition (SE)/ Premium Edition (PE) is a 2U appliance. Each model has two 14-core processors for a total of 28 physical cores (with hyper-threading enabled), and 256 GB of memory. For latest performance and bandwidth capacity details, see the Citrix SD-WAN data sheet.
The following Citrix SD-WAN™ software versions are supported on the 6100 appliance editions:
- Citrix SD-WAN 6100 SE – Citrix SD-WAN 10.2.3 and above.
- Citrix SD-WAN 6100 PE - Shipped with Citrix SD-WAN 10.2.7 image, upgrade the software to Citrix SD-WAN 11.2.1 and above to enable PE functionality.
The Citrix SD-WAN 6100 SE/PE appliance front panel has the following ports:
| Port | Description |
|---|---|
| 0/1, 0/2 | 10/100/1000 Base-T copper Ethernet management ports (RJ45) |
| 1/1, 1/2, 1/3, 1/4 | 1000 Base-TX Fail-To-Wire |
| 10/1, 10/2, 10/3, 10/4 | 10G Base-SR Fail-To-Wire |
| 10/5, 10/6, 10/7, 10/8 | 10G SFP+ |
The following components are visible on the back panel of the Citrix SD-WAN 6100 SE/PE appliance:
For Citrix SD-WAN 6100 SE [SSD Configuration]
- Drive bay 3 - 2.5” Boot drive SSD with 480 GB capacity
- Drive bay 1, 2, 4 - 2.5” SSD Plastic Drive Tray “Fillers- Dummy”
For Citrix SD-WAN 6100 PE [SSD Configuration]
- Drive bay 3 - 2.5” Boot drive SSD with 480 GB capacity
- Drive bay 1, 2, 4 - 2.5” 960 GB SSD.
Power Switch and back end Button functionalities:
-
Power switch, which turns off power to the appliance, as if you were to unplug the power supply. Press the switch for five seconds to turn off the power.
-
Disable PS alarm button is functional only when the appliance has two power supplies.
Press this button to mute the power alarm from sounding:
- When you have plugged the appliance into only one power outlet.
- When one power supply is malfunctioning and you want to continue operating the appliance until it is repaired.
-
Dual redundant, hot-swappable power supplies (100–240 VAC standard 1,000 W, 48 V DC optional).
Convert the Citrix SD-WAN 6100 SE appliance to the Citrix SD-WAN 6100 PE appliance
- Insert the required SSD in the Citrix SD-WAN SE appliance.
- Drive bay 3-Insert 2.5” Boot drive SSD with 480 GB capacity.
- Drive bay 1, 2, and 4- Insert 2.5” 960 GB SSD. For instructions about how to insert SSD, see Solid State Drive.
- Restart the appliance through the SD-WAN web management interface.
-
Ensure that the software release version installed on the appliance is Citrix SD-WAN 11.2.1 or above. If the appliance is running a version lower than 11.2.1, upgrade the software to 11.2.1 and perform a local change management. For upgrade instructions, see Upgrade paths.
- Install the Premium Edition platform license. For license information, see Citrix SD-WAN product downloads.
Summary of hardware specifications
The following table summarizes the specifications of Citrix SD-WAN 6100 SE hardware platform.
| Specifications | Citrix SD-WAN 6100 SE/PE |
|---|---|
| Compliance Regulatory Model number | 2U1P1A |
| Processors | 2x 14 Core processor (Intel E5-2680 v4 14-core, 2.4 GHz) |
| Memory | 256 GB 2,400 MHz, 8x 32 GB RDIMM |
| Number of power supplies | 2 (Each 1,000 W; Dual Redundant Hot swappable) |
| AC power supply, input voltage, frequency, and current | 100–240 V AC, 50–60 Hz, 5.5-2.8A |
| DC input voltage and Current | -36 V DC to -72 V DC, 15.4-7.7A |
| Typical AC power consumption | 357 W |
| Maximum AC power consumption | 480 W |
| Typical Heat Dissipation | 1251 BTU/Hr |
| Max Heat Dissipation | 1218 BTU/Hr |
| Typical Airflow (front to rear) | 65 CFM |
| Max Airflow (front to rear) | 125 CFM |
| Altitude Range | Max 5,000 m (Up to 16,000 ft) |
| Solid State Drives (SSD) | 1x480GB and 3x960GB SSD (1.2GB DBC, applicable for PE only) |
| Package weight | 69 (lbs) (31.3 Kg) |
| Shipping dimensions | 36.5’ L X 24.5’ W X 11’ H (94 x 63 x 28 cm) |
| System weight (lbs) | 60 (lbs) (27.2 Kg) |
| Rack Height | 2U |
| Rack Width | EIA 310-D for 19 (inch) racks |
| Rack Depth | 28 inches (71.1 cm) |
| Operating temperature | 0–45°C (32–113°F) |
| Humidity (non-condensing) | 5% - 95% |
| Safety certifications | IEC 60950-1, second Edition |
| CSA 60950-1, second Edition | |
| UL 60950-1, second Edition | |
| AS/NZS 60950-1 | |
| EMC and susceptibility | US (FCC (Part 15 Class A)), Europe (CE (EN55032/55024)), Australia (RCM), Japan (VCCI), Korea (KCC), Taiwan (BSMI), China (CCC), India (BIS), Russia (CUTR), Russia (EAC), Saudi Arabia (CITC), Brazil (Anatel), South Africa (ICASA), Mexico (NOM), Egypt (NTRA), Israel (MoC) |
| Environmental compliance | ROHS, WEEE, REACH |