Citrix SD-WAN Platforms

Connecting to the SD-WAN VPX and Testing the Deployment

June 25, 2020

Contributed by:

S C

The next step is to connect to the new SD-WAN VPX-SE Virtual Appliance, to confirm that the deployment was successful.

To test the deployment, do the following:

On a connected PC, open a browser and enter the Management IP Address for the SD-WAN VPX-SE Virtual Appliance. You can use any PC connected to your network (for example, the local PC you used to deploy the SD-WAN VPX-SE Virtual Machine in the vSphere Client). If you have successfully assigned the Management IP Address for the SD-WAN VPX-SE, the Management Web Interface Login page displays.
Enter the Administrator user name and password, and click Login.
- Default Administrator user name: admin
- Default Administrator password: password

Note

It is recommended that you change the default password as soon as possible. Be sure to record the password in a secure location, as password recovery might require a configuration reset.

After you have logged into the Management Web Interface, the Dashboard page displays.

localized image

The first time you log into the Management Web Interface on an appliance, the Dashboard displays an Alert icon (goldenrod delta) and alert message indicating that the Virtual WAN Service is disabled, and the license has not been installed. For now, you can ignore this alert. The alert will be resolved automatically after you have installed the license, and completed the configuration and deployment process for the appliance.

You have now completed the initial installation and deployment of the SD-WAN VPX-SE Virtual Appliance. However, there are some remaining steps to complete the set-up process for the Virtual Appliance before adding it to your SD-WAN network. For instructions on completing the next step, please proceed to the section, Initial setup.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

Connecting to the SD-WAN VPX and Testing the Deployment

June 25, 2020

Contributed by:

S C

June 25, 2020

Contributed by:

S C

Connecting to the SD-WAN VPX and Testing the Deployment

In this article