Citrix SD-WAN Platforms

SD-WAN 5100 WANOP

June 19, 2020

Contributed by:

Citrix SD-WAN 5100 WANOP is a 2U appliance. Each model has 10-core processor with 2.80 GHz and 128 gigabytes (GB) of memory. The Citrix SD-WAN 5100 WANOP appliance has a bandwidth of 2 Gbps.

The following figure shows the front panel of the Citrix SD-WAN 5100 WANOP appliance.

Figure 1. Citrix SD-WAN 5100 WANOP, front panel

localized image

The Citrix SD-WAN 5100 WANOP appliance has the following ports:

10/100Base-T copper Ethernet Port (RJ45), also called LOM port. You can use this port to remotely monitor and manage the appliance independently of the appliance’s software.
RS232 serial console port.
Ethernet ports:
- Two 2-port 10/1G bypass, One 4-port 10G/1G, One 2-port 10G.

These ports are used to connect directly to the appliance for system administration functions.

The following figure shows the back panel of the Citrix SD-WAN 5100 WANOP appliance.

Figure 2. Citrix SD-WAN 5100 WANOP, back panel

localized image

The following components are visible on the back panel of the Citrix SD-WAN 5100 WANOP appliance:

Six 800 GB removable solid-state drives, which store the appliance’s compression history.
Power switch, which turns off power to the appliance, as if you were to unplug the power supply. Press the switch for five seconds to turn off the power.
Two 1 TB removable hard disk drive.
Disable alarm button. This button is functional only when the appliance has two power supplies. Press this button to stop the power alarm from sounding when you have plugged the appliance into only one power outlet or when one power supply is malfunctioning and you want to continue operating the appliance until it is repaired.
Two power supplies (either AC or DC). providing full hot swap redundancy. Each power supply has an LED indicating its status.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

SD-WAN 5100 WANOP

June 19, 2020

Contributed by:

June 19, 2020

Contributed by:

SD-WAN 5100 WANOP

In this article