Product Documentation
ADC
14.1 - Current Release 13.1 13.0 12.1
View PDF

Protect the GSLB setup against failure

August 1, 2023
Contributed by: 
S

You can protect your GSLB setup against failure of a GSLB site or a GSLB virtual server by configuring the following:

  • A backup GSLB virtual server
  • A NetScaler appliance to respond with multiple IP addresses
  • A backup IP address for a GSLB domain

You can also divert excess traffic to a backup virtual server by using spillover.

Configure a backup GSLB virtual server

Configuring a backup entity for a GSLB virtual server ensures that DNS traffic to a site is not interrupted if the GSLB virtual server goes down. The backup entity can be another GSLB virtual server, or it can be a backup IP address. With a backup entity configured, if the primary GSLB virtual server goes down, the backup entity handles DNS requests. To specify what must happen when the primary GSLB virtual server comes back up again, you can configure the backup entity to continue handling traffic until you manually enable the primary virtual server to take over (using the disablePrimaryOnDown option).

Note: You can configure a single backup entity as backup for multiple GSLB virtual servers.

To configure a backup GSLB virtual server by using the command line interface

At the command prompt, type the following commands to configure a GSLB virtual server as backup virtual server and verify the configuration:

set gslb vserver <name> -backupVServer <name> [-disablePrimaryOnDown (ENABLED | DISABLED)]

show gslb vserver <name>
<!--NeedCopy-->

Example:

set gslb vserver vserver-GSLB-1 -backupVServer vserver-GSLB-2 -disablePrimaryOnDown ENABLED
show gslb vserver vserver-GSLB-1
<!--NeedCopy-->

To set GSLB virtual server as a backup virtual server by using the configuration utility

  1. Navigate to Traffic Management > GSLB > Virtual Servers, and double-click the GSLB virtual server.
  2. Select the Backup Virtual Server section and choose the backup virtual server.

Configure a GSLB setup to respond with multiple IP addresses

A typical DNS response contains the IP address of the best performing GSLB service. However, if you enable multiple IP responses (MIR), the NetScaler appliance sends the best GSLB service as the first record in the response and adds the remaining active services as extra records. If MIR is disabled (the default), the NetScaler appliance sends the best service as the only record in response.

To configure a GSLB virtual server for multiple IP responses by using the command line interface

At the command prompt, type the following commands to configure a GSLB virtual server for multiple IP responses and verify the configuration:

set gslb vserver<name> -MIR (ENABLED | DISABLED)
-  show gslb vserver <name>
<!--NeedCopy-->

Example:

set gslb vserver vserver-GSLB-1 -MIR ENABLED
 show gslb vserver <vserverName>
<!--NeedCopy-->

To set a GSLB virtual server for multiple IP responses by using the configuration utility

  1. Navigate to Traffic Management > GSLB > Virtual Servers and double-click the GSLB virtual server for which you want to configure a backup virtual server (for example, vserver-GSLB-1).
  2. On the Advanced tab, under When this virtual server is “UP,” select the Send all “active” service IP in response (MIR) check box, and select OK.

Configuring a GSLB Virtual Server to Respond with an Empty Address Record When DOWN

A DNS response can contain either the IP address of the requested domain or an answer stating that the IP address for the domain is not known by the DNS server, in which case the query is forwarded to another name server. These are the only possible responses to a DNS query.

When a GSLB virtual server is disabled or in a DOWN state, the response to a DNS query for the GSLB domain bound to that virtual server contains the IP addresses of all the services bound to the virtual server. However, you can configure the GSLB virtual server to in this case send an empty down response (EDR). When this option is set, a DNS response from a GSLB virtual server that is in a DOWN state does not contain IP address records, but the response code is successful. This prevents clients from attempting to connect to GSLB sites that are down.

Note: You must configure this setting for each virtual server to which you want it to apply.

To configure a GSLB virtual server for empty down responses by using the command line interface

At the command prompt, type:

set gslb vserver<name> -EDR (ENABLED | DISABLED)
<!--NeedCopy-->

Example:

> set gslb vserver vserver-GSLB-1 -EDR ENABLED
 Done
<!--NeedCopy-->

To set a GSLB virtual server for empty down responses by using the configuration utility

  1. Navigate to Traffic Management > GSLB > Virtual Servers and double-click the GSLB virtual server for which you want to configure a backup virtual server (for example, vserver-GSLB-1).
  2. On the Advanced tab, under When this virtual server is “Down,” select the Do not send any service’s IP address in response (EDR) check box.
  3. Click OK.

Configure a backup IP address for a GSLB domain

You can configure a backup site for your GSLB configuration. With this configuration in place, if all the primary sites go DOWN, the IP address of the backup site is provided in the DNS response.

Typically, if a GSLB virtual server is active, that virtual server sends a DNS response with one of the active site IP addresses as selected by the configured GSLB method. If all the configured primary sites in the GSLB virtual server are inactive (in the DOWN state), the authoritative domain name system (ADNS) server or DNS server sends a DNS response with the backup site’s IP address.

Note: When a backup IP address is sent, persistence is not honored.

To set a backup IP address for a domain by using the command line interface

At the command prompt, type the following commands to set a backup IP address and verify the configuration:

set gslb vserver <name> -domainName <string> -backupIP <IPAddress>
show gslb vserver <name>
<!--NeedCopy-->

Example:

set gslb vserver vserver-GSLB-1 -domainName www.abc.com -backupIP 10.102.29.66
show gslb vserver vserver-GSLB-1
<!--NeedCopy-->

To set a backup IP address for a domain by using the configuration utility

  1. Navigate to Traffic Management > GSLB > Virtual Servers and double-click the GSLB virtual server to which you want to bind the backup domain (for example, vserver-GSLB-1).
  2. Click the Domains section, configure the GSLB domain and specify the IP address of the backup domain in the Backup IP field.

Divert excess traffic to a backup virtual server

Once the number of connections to a primary GSLB virtual server exceeds the configured threshold value, you can use the spillover option to divert new connections to a backup GSLB virtual server. This threshold value can be calculated dynamically or set manually. Once the number of connections to the primary virtual server drops below the threshold, the primary GSLB virtual server resumes serving client requests.

You can configure persistence with spillover. When persistence is configured, new clients are diverted to the backup virtual server if that client is not already connected to a primary virtual server. When persistence is configured, connections that were diverted to the backup virtual server are not moved back to the primary virtual server after the number of connections to the primary virtual server drops below the threshold. Instead, the backup virtual server continues to process those connections until they are terminated by the user. Meanwhile, the primary virtual server accepts new clients.

The threshold can be measured by the number of connections, bandwidth, and health of the services.

If the backup virtual server reaches the configured threshold and is unable to take any additional load, the primary virtual server diverts all requests to the designated redirect URL. If a redirect URL is not configured on the primary virtual server, subsequent requests are dropped.

The spillover feature prevents the remote backup GSLB service (backup GSLB site) from getting flooded with client requests when the primary GSLB virtual server fails. This occurs when a monitor is bound to a remote GSLB service, and the service experiences a failure that causes its state to go DOWN. The monitor continues to keep the state of the remote GSLB service UP, however, because of the spillover feature.

As part of the resolution to this problem, two states are maintained for a GSLB service, the primary state and effective state. The primary state is the state of the primary virtual server and the effective state is the cumulative state of the virtual servers (primary and backup chain). The effective state is set to UP if any of the virtual servers in the chain of virtual servers is UP. A flag that indicates that the primary VIP has reached the threshold is also provided. The threshold can be measured by either the number of connections or the bandwidth.

A service is considered for GSLB only if its primary state is UP. Traffic is directed to the backup GSLB service only when all the primary virtual servers are DOWN. Typically, such deployments have only one backup GSLB service.

Adding primary and effective states to a GSLB service has the following effects:

  • When source IP persistence is configured, the local DNS is directed to the previously selected site only if the primary virtual server on the selected site is UP and below threshold. Persistence can be ignored in the round robin mode.
  • If cookie-based persistence is configured, client requests are redirected only when the primary virtual server on the selected site is UP.
  • If the primary virtual server has reached its saturation and the backup VIPs is absent or down, the effective state is set to DOWN.
  • If external monitors are bound to an HTTP-HTTPS virtual server, the monitor decides the primary state.
  • If there is no backup virtual server to the primary virtual server and the primary virtual server has reached its threshold, the effective state is set to DOWN.

To configure backup GSLB virtual server by using the command line interface

At the command prompt, type the following commands to configure backup GSLB virtual server and verify the configuration:

set gslb vserver <name> -soMethod <method> -soThreshold <threshold> -soPersistence ( **ENABLED** | **DISABLED** ) -soPersistenceTimeout <timeout>
show gslb vserver <name>
<!--NeedCopy-->

Example:

set gslb vserver Vserver-GSLB-1 -soMethod CONNECTION -soThreshold 1000 -soPersistence ENABLED -soPersistenceTimeout 2
show gslb vserver Vserver-GSLB-1
<!--NeedCopy-->

To configure backup GSLB virtual server by using the configuration utility

  1. Navigate to Traffic Management > GSLB > Virtual Servers and double-click the virtual server that you want to configure as backup (for example, Vserver-LB-1).
  2. Click the SpillOver section and set the following parameters:
    • Method— soMethod
    • Threshold— soThreshold
    • Persistence Time-out (min) — soPersistenceTimeout
  3. Select the Persistence option and click OK.
Protect the GSLB setup against failure
August 1, 2023
Contributed by: 
S
August 1, 2023
Contributed by: 
S

In this article

Site feedback | Your privacy choices footer linkYour Privacy Choices | Privacy and legal terms | Cookie preferences | Consent settings | docs.cloud.com
© 1999- Cloud Software Group, Inc. All rights reserved.