ADC

Configure a basic GSLB site

August 1, 2023

Contributed by:

A GSLB site is a representation of a data center in your network and is a logical grouping of GSLB virtual servers, services, and other network entities. Typically, in a GSLB set up, there are many GSLB sites that are equipped to serve the same content to a client. These are usually geographically separated to ensure that the domain is active even if one site goes down completely. All of the sites in the GSLB configuration must be configured on every NetScaler appliance hosting a GSLB site. In other words, at each site, you configure the local GSLB site and each remote GSLB site.

Once GSLB sites are created for a domain, the NetScaler appliance sends client requests to the appropriate GSLB site as determined by the GSLB algorithms configured.

To create a GSLB site by using the command line interface

At the command prompt, type the following commands to create a GSLB site and verify the configuration:

add gslb site <siteName> <siteIPAddress>
show gslb site <siteName>
<!--NeedCopy-->

Example:

add gslb site Site-GSLB-East-Coast 10.14.39.21
show glsb site Site-GSLB-East-Coast
<!--NeedCopy-->

To modify or remove a GSLB Site by using the command line interface

To modify a GSLB site, use the set gslb site command, which is just like using the add gslb site command, except that you enter the name of an existing GSLB Site.
To unset a site parameter, use the unset gslb site command, followed by the siteName value and the name of the parameter to be reset to its default value.
To remove a GSLB site, use the rm gslb site command, which accepts only the <name> argument.

To configure a basic GSLB site by using the configuration utility

Navigate to Traffic Management > GSLB > Sites.
Add a new GSLB site, or select an existing GSLB site and edit its settings.

To view the statistics of a GSLB site by using the command line interface

At the command prompt, type:

stat gslb site <siteName>
<!--NeedCopy-->

Example:

stat gslb site Site-GSLB-East-Coast
<!--NeedCopy-->

To view the statistics of a GSLB site by using the configuration utility

Navigate to Traffic Management > GSLB > Sites.
Select the GSLB site and click Statistics.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Configure a basic GSLB site

August 1, 2023

Contributed by:

August 1, 2023

Contributed by:

To create a GSLB site by using the command line interface
To modify or remove a GSLB Site by using the command line interface
To configure a basic GSLB site by using the configuration utility
To view the statistics of a GSLB site by using the command line interface
To view the statistics of a GSLB site by using the configuration utility

Configure a basic GSLB site

To create a GSLB site by using the command line interface

To modify or remove a GSLB Site by using the command line interface

To configure a basic GSLB site by using the configuration utility

To view the statistics of a GSLB site by using the command line interface

To view the statistics of a GSLB site by using the configuration utility

In this article