ADC

Configure a Thales Luna client on the ADC

September 11, 2024

Contributed by:

After you have configured the Thales Luna HSM and created the required partitions, you must create clients and assign them to partitions. Begin by configuring the Thales Luna clients on the NetScaler and setting up the network trust links (NTLs) between the Thales Luna clients and the Thales Luna HSM. A sample configuration is given in the Appendix.

Note

If you upgrade to software version 13.1, you must install the Thales Luna client version 10.3.0 and perform the following steps.

Change the directory to /var/safenet and install the Thales Luna client. At the shell prompt, type:
```
cd /var/safenet

```
To install Thales Luna client version 6.0.0, type:
```
install_client.sh -v 600

```
To install Thales Luna client version 6.2.2, type:
```
install_client.sh -v 622

```
To install Thales Luna client version 7.2.2, type:
```
install_client.sh -v 722

```
To install Thales Luna client version 10.3.0, type:
```
install_client.sh -v 1030

```
Configure the NTLs between Thales Luna client (ADC) and HSM.

After the ‘/var/safenet/’ directory is created, perform the following tasks on the ADC.

a) Change the directory to ‘/var/safenet/config/’ and run the ‘safenet_config’ script. At the shell prompt, type:
```
cd /var/safenet/config

sh safenet_config

```
This script copies the “Chrystoki.conf” file into the /etc/ directory. It also generates a symbolic link ‘libCryptoki2_64.so’ in the ‘/usr/lib/’ directory.

b) Create and transfer a certificate and key between the ADC and the Thales Luna HSM.

To communicate securely, the ADC and the HSM must exchange certificates. Create a certificate and key on the ADC and then transfer it to the HSM. Copy the HSM certificate to the ADC.

i) Change directory to /var/safenet/safenet/lunaclient/bin.

ii) Create a certificate on the ADC. At the shell prompt, type:
```
./vtl createCert -n <ip address of NetScaler>

```
This command also adds the certificate and key path to the “/etc/Chrystoki.conf” file.

iii) Copy this certificate to the HSM. At the shell prompt, type:
```
scp /var/safenet/safenet/lunaclient/cert/client/<ip address of NS>.pem <LunaSA_HSM account>@<IP address of Luna SA>

```
iv) Copy the HSM certificate to the NetScaler. At the shell prompt, type:
```
scp <HSM account>@<HSM IP>:server.pem  /var/safenet/safenet/lunaclient/server_<HSM ip>.pem

```
Register the NetScaler as a client and assign it a partition on the Thales Luna HSM.

Log on to the HSM and create a client. Enter the NSIP as the client IP. This address must be the IP address of the ADC from which you transferred the certificate to the HSM. After the client is successfully registered, assign a partition to it. Run the following commands on the HSM.

a) Use SSH to connect to the Thales Luna HSM and enter the password.

b) Register the NetScaler on the Thales Luna HSM. The client is created on the HSM. The IP address is the client’s IP address. That is, the NSIP address.

At the prompt, type:
```
client register –client <client name> -ip <NetScaler ip>

```
c) Assign the client a partition from the partition list. To view the available partitions, type:
```
<luna_sh> partition list

```
Assign a partition from this list. Type:
```
<lunash:> client assignPartition -client <Client Name> -par <Partition Name>

```
Register the HSM with its certificate on the NetScaler.

On the ADC, change the directory to “/var/safenet/safenet/lunaclient/bin” and, at the shell prompt, type:
```
./vtl addserver -n <IP addr of HSM> -c /var/safenet/safenet/lunaclient/server_<HSM_IP>.pem

```
To remove the HSM that is enrolled on the ADC, type:
```
./vtl deleteServer -n <HSM IP> -c <cert path>

```
To list the HSM servers configured on the ADC, type:
```
./vtl listServer

```
Note:

Before removing the HSM by using vtl, make sure all the keys for that HSM are manually removed from the appliance. HSM keys cannot be deleted after the HSM server is removed.
Verify the network trust links (NTLs) connectivity between the ADC and HSM. At the shell prompt, type:
```
./vtl verify

```
If verification fails, review all the steps. Errors are due to an incorrect IP address in the client certificates.
Save the configuration.

The preceding steps update the “/etc/Chrystoki.conf” configuration file. This file is deleted when the ADC is started. Copy the configuration to the default configuration file, which is used when an ADC is restarted.

At the shell prompt, type:
```
root@ns# cp /etc/Chrystoki.conf /var/safenet/config/

```
Recommended practice is to run this command every time there is a change to the Thales Luna related configuration.
Start the Thales Luna gateway process.

At the shell prompt, type:
```
sh /var/safenet/gateway/start_safenet_gw

```
Configure automatic start of the gateway daemon at boot time.

Create the “safenet_is_enrolled” file, which indicates that Thales Luna HSM is configured on this ADC. Whenever the ADC restarts and this file is found, the gateway is automatically started.

At the shell prompt, type:
```
touch /var/safenet/safenet_is_enrolled

```
Restart the NetScaler appliance. At the command prompt, type:
```
reboot

```

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Configure a Thales Luna client on the ADC

September 11, 2024

Contributed by:

September 11, 2024

Contributed by:

Configure a Thales Luna client on the ADC

In this article