ADC

Set a threshold value for the monitors bound to a service

August 1, 2023

Contributed by:

The NetScaler appliance designates a service as UP only when the sum of the weights of all monitors bound to it and that are UP is equal to or greater than the threshold value configured on the service. The weight for a monitor specifies how much that monitor contributes to designating the service to which it is bound as UP.

By default, the monitor threshold is set to 0 and monitor weights are set to 1. All monitors have equal weightage then and a service can go DOWN when any one of the monitors goes DOWN.

For example, assume that three monitors, named Monitor-HTTP-1, Monitor-HTTP-2, and Monitor-HTTP-3 respectively, are bound to Service-HTTP-1, and that the threshold configured on the service is three. Suppose the following weights are assigned to each monitor:

The weight of Monitor-HTTP-1 is 1.
The weight of Monitor-HTTP-2 is 3.
The weight of Monitor-HTTP-3 is 1.

The service is marked UP only when one of the following is true:

Monitor-HTTP-2 is UP.
Monitor-HTTP-2 and Monitor-HTTP-1 or Monitor-HTTP-3 are UP
All three monitors are UP.

To set the monitor threshold value on a service by using the CLI

At the command prompt, type:

set service <name> -monThreshold <Value>
<!--NeedCopy-->

Example:

set service Service-HTTP-1 -monThreshold 100
<!--NeedCopy-->

To set the monitor threshold value on a service by using the GUI

Navigate to Traffic Management > Load Balancing > Services, and open a service.
In Advanced Settings, select Thresholds & Timeouts, and select Monitor Threshold.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Set a threshold value for the monitors bound to a service

August 1, 2023

Contributed by:

August 1, 2023

Contributed by:

Set a threshold value for the monitors bound to a service

To set the monitor threshold value on a service by using the CLI

To set the monitor threshold value on a service by using the GUI

In this article