Application Delivery Management

Configure an NTP server

December 31, 2023

Contributed by:

You can configure a Network Time Protocol (NTP) server in Citrix Application Delivery Management (ADM) to synchronize its clock with the NTP server. Configuring an NTP server ensures that the Citrix ADM clock has the same date and time settings as the other servers on the network.

To configure an NTP server on Citrix ADM:

Navigate to System > NTP Servers, and then click Add.
On the Create NTP Server page, enter the following details:
- Server Name/IP Address – Enter the domain name or IP address of the NTP server. The name or IP address cannot be changed after you have added the NTP server.
- Minimum Poll Interval – Specify the minimum value for the interval between transmitted NTP messages, in seconds as a power of 2. For example, if you want the minimum poll interval to be 64 seconds, which can be expressed as 2^6, enter 6.
- Maximum Poll Interval – Specify the maximum value for the interval between transmitted NTP messages, in seconds as a power of 2. For example, if you want the maximum poll interval to be 256 seconds, which can be expressed as 2^8, enter 8.
- Key Identifier - Enter the key identifier that can be used for symmetric key authentication with the NTP server. Do not add a key identifier if you choose to select Autokey.
- Autokey - Select Autokey if you want to use public key authentication with the NTP server. Do not select if you want to add a key identifier.
- Preferred – Select this option if you want to specify this NTP server as the preferred server for clock synchronization. This applies only if more than one server is configured.
Click Create.

To enable NTP synchronization on Citrix ADM:

Navigate to System > NTP Servers.
Click NTP Synchronization and select the Enable NTP Synchronization check box.
Click OK.

Note

You can find the NTP logs messages in the /var/log directory in the file/var/log/ntpd.log file.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Configure an NTP server

December 31, 2023

Contributed by:

December 31, 2023

Contributed by:

Configure an NTP server

In this article