ADC

Set SSL parameters on a secure monitor

September 14, 2021

Contributed by:

S C

Important

This feature is supported only on the new Default profiles. For more information about these profiles, see Enhanced SSL Profiles Infrastructure Overview.

A monitor inherits either the global settings or the settings of the service to which it is bound. If a monitor is bound to a non-SSL or non-SSL_TCP service, such as SSL_BRIDGE, you cannot configure it with SSL settings such as the protocol version or the ciphers to be used. Therefore, if your deployment requires SSL-based monitoring of the back-end servers, the monitoring is ineffective.

You can have more control over SSL-based monitoring of back-end servers, by binding an SSL profile to a monitor. An SSL profile contains SSL parameters, cipher bindings, and ECC bindings. For example, you can set server authentication, ciphers, and protocol version in an SSL profile and bind the profile to a monitor. To perform server authentication, you must also bind a CA certificate to a monitor. To perform client authentication, you must bind a client certificate to the monitor. New parameters for the “bind lb monitor” command enable you to do so.

Note

The SSL settings take effect only if you add a secure monitor. Also, the SSL profile type must be BackEnd.

Monitor Types that Support SSL Profiles

SSL profiles can be bound to the following monitor types:

HTTP
HTTP-ECV
TCP
TCP-ECV
HTTP-INLINE

To specify an SSL profile while adding a monitor by using the command line

At the command prompt, type:

add lb monitor <monitorName> <type> -secure  YES   -sslprofile <string>

set lb monitor <monitorName> <type> -secure YES -sslprofile <string>
<!--NeedCopy-->

Example:

add ssl profile prof1 -sslProfileType  BackEnd

add lb monitor mon1 HTTP -secure  YES -sslprofile prof1
<!--NeedCopy-->

To bind a certificate-key pair to a monitor by using the command line

At the command prompt, type:

bind monitor  <monitor name> -certkeyName <string>  [(-CA  [-crlCheck ( Mandatory | Optional ) | -ocspCheck ( Mandatory | Optional )]
<!--NeedCopy-->

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Set SSL parameters on a secure monitor

September 14, 2021

Contributed by:

S C

September 14, 2021

Contributed by:

S C

Set SSL parameters on a secure monitor

Monitor Types that Support SSL Profiles

To specify an SSL profile while adding a monitor by using the command line

To bind a certificate-key pair to a monitor by using the command line

In this article