ADC

Static proximity method

September 14, 2021

Contributed by:

S C

When a virtual server is configured to use the static proximity method, it selects the service that best matches the proximity criteria.

For the static proximity method to work, you must either configure the Citrix ADC appliance to use an existing static proximity database populated through a location file or add custom entries to the static proximity database. After adding custom entries, you can set their location qualifiers. After configuring the database, you are ready to specify static proximity as the load balancing method.

For more details, see the following topics.

Specifying the Proximity Method

When you have configured the static proximity database, you are ready to specify static proximity as the GLSB method.

To specify static proximity by using the command line interface

At the command prompt, type the following commands to configure static proximity and verify the configuration:

set lb vserver <name> -lbMethod STATICPROXIMITY

show lb vserver <name>
<!--NeedCopy-->

Example:

set lb vserver Vserver-LB-1 -lbMethod STATICPROXIMITY

show lb vserver
<!--NeedCopy-->

To specify static proximity by using the GUI

Navigate to Traffic Management > Load Balancing > Virtual Servers and select the virtual server.
Click Edit and expand the Method section.
In the Load Balancing Method list, select STATICPROXIMITY.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Static proximity method

September 14, 2021

Contributed by:

S C

September 14, 2021

Contributed by:

S C

Static proximity method

Specifying the Proximity Method

To specify static proximity by using the command line interface

To specify static proximity by using the GUI

In this article