ADC

DNS configuration

June 28, 2022

Contributed by:

C S

You can configure a Citrix ADC appliance to function as an Authoritative Domain Name Server (ADNS), DNS proxy server, End Resolver, or Forwarder. You can add DNS resource records such as SRV Records, AAAA Records, A Records, MX Records, NS Records, CNAME Records, PTR Records, and SOA Records. Also, the appliance can balance the load on external DNS servers.

A common practice is to configure an appliance as a forwarder. For this configuration, you need to add external name servers. After you have added the external servers, you should verify that your configuration is correct.

You can add, remove, enable, and disable external name servers. You can create a name server by specifying its IP address, or you can configure an existing virtual server as the name server.

When adding name servers, you can specify IP addresses or virtual IP addresses (VIPs). If you use IP addresses, the appliance load balances requests to the configured name servers in a round robin manner. If you use VIPs, you can specify any load balancing method.

Add a name server by using the CLI

At the command prompt, type the following commands to add a name server and verify the configuration:

<add dns nameServer \<IP\>

<show dns nameServer \<IP\>

Example

 > add dns nameServer 10.102.29.10
  Done
 > show dns nameServer 10.102.29.10
 1)       10.102.29.10  -  State: DOWN
  Done


 <!--NeedCopy-->

Add a name server by using the GUI

Navigate to Traffic Management > DNS > Name Servers.
In the details pane, click Add.
In the Create Name Server dialog box, select IP Address.
In the IP Address text box, type the IP address of the name server (for example, 10.102.29.10). If you are adding an external name server, clear the Local check box.
Click Create, and then click Close.
Verify that the name server you added appears in the Name Servers pane.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

DNS configuration

June 28, 2022

Contributed by:

C S

June 28, 2022

Contributed by:

C S

DNS configuration

Add a name server by using the CLI

Add a name server by using the GUI

In this article