ADC

Display configured PMAC addresses for shared VLAN configuration

September 14, 2021

Contributed by:

S C

To use a partition setup with shared VLAN configuration, you need a virtual MAC address called as partition MAC (PMAC) address. The partition uses the PMAC address for its communication on the shared VLAN. A unique PMAC address is configured for each partition and it is used across all shared VLANs bound to that partition. In the case of a non-SDX platform (VPX or MPX) platform, the PMAC address can be either user specified or internally generated by a Citrix ADC appliance. If the PMAC address is not specified for a partition, it is internally generated when the partition is bound to the first shared VLAN. While in the case of an SDX platform, the PMAC addresses always need to be configured from the SVM tool first and then assigned to a partition.

To display a list of configured PMACs, you can use the Show ns PartitionMAC command. The command enables you to verify the configured PMACs either through the Citrix ADC CLI or GUI. The command displays all the PMAC addresses and the corresponding partitions (if assigned). In the case of a non-SDX platform, the command displays all the PMAC addresses and their corresponding partitions because the PMAC address is assigned to a partition only on need basis (when a partition bound a shared VLAN). However in the case of an SDX platform, you might have some unassigned PMACs in the list.

For information on how to generate PMAC for the SDX platform, see Generating Partition MAC Addresses topic.

Display PMACs by using the Citrix ADC CLI

At the command prompt, type the following command:

show ns partitionMAC

Partition MAC Partition Name

1) f2:0c:64:da:f6:d7

2) b4:0c:43:da:f6:d2

3) a6:e7:b2:6c:48:e0

Done

Display PMAC Addresses by using the Citrix ADC GUI

Sign in to the Citrix ADC appliance and navigate to the Configuration > System > Partition MAC.
The Partition MAC page displays a list of PMACs and its partitions.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Display configured PMAC addresses for shared VLAN configuration

September 14, 2021

Contributed by:

S C

September 14, 2021

Contributed by:

S C

Display configured PMAC addresses for shared VLAN configuration

Display PMACs by using the Citrix ADC CLI

Display PMAC Addresses by using the Citrix ADC GUI

In this article