ADC

Enable cache redirection and load balancing

September 14, 2021

Contributed by:

The appliance cache redirection and load balancing features are not enabled by default. They must be enabled before any cache redirection configuration can take effect.

Enable cache redirection and load balancing by using the CLI

At the command prompt, type the following command to enable cache redirection and load balancing and verify the settings:

-  enable ns feature cr lb  
-  show ns feature  
<!--NeedCopy-->

Example:

> enable ns feature cr lb
 Done
> show ns feature

        Feature                        Acronym              Status
        -------                        -------              ------
 1)     Web Logging                    WL                   ON
 2)     Surge Protection               SP                   ON
 3)     Load Balancing                 LB                   ON
 4)     Content Switching              CS                   ON
 5)     Cache Redirection              CR                   ON
 6)     Sure Connect

            ...
            ...
            ...

 23)    HTML Injection                 HTMLInjection        ON
 24)    appliance Push                 push                 OF
 Done
<!--NeedCopy-->

Enable cache redirection and load balancing by using the GUI

In the navigation pane, expand System, and then click Settings.
To enable cache redirection, in the details pane, under Modes and Features, click Configure advanced features.
1. In Configure Advanced Features dialog box, select the check box next to the Cache Redirection, and then click OK.
2. In Enable/Disable Feature(s)? dialog box, click Yes.
To enable load balancing, in the details pane, under Modes and Features, click Configure basic features.
1. In Configure Basic Features dialog box, select the check box next to the Load Balancing, and then click OK.
2. In Enable/Disable Feature(s)? dialog box, click Yes.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Enable cache redirection and load balancing

September 14, 2021

Contributed by:

September 14, 2021

Contributed by:

Enable cache redirection and load balancing

Enable cache redirection and load balancing by using the CLI

Enable cache redirection and load balancing by using the GUI

In this article