ADC

Add custom entries to a static proximity database

September 14, 2021

Contributed by:

S C

Custom entries take precedence over static entries in the proximity database. You can add a maximum of 500 custom entries. For a custom entry, denote all omitted qualifiers with an asterisk (*) and, if qualifiers have a period or space in the name, enclose the parameter in double quotation marks. The first 31 characters are evaluated for each qualifier. You can also provide the longitude and latitude of the geographical location of the IP address-range for selecting a service with the static proximity GSLB method.

To add custom entries by using the command line interface

At the command prompt, type the following commands to add a custom entry to the static proximity database and verify the configuration:

add location < IPfrom> < IPto> <preferredLocation> [-longitude <integer>[-latitude <integer>]]
show location
<!--NeedCopy-->

Example:

>add location 192.168.100.1 192.168.100.100 *.us.ca.mycity
<!--NeedCopy-->

>show location
<!--NeedCopy-->

Parameters for adding custom entries

IPfrom

First IP address in the range, in dotted decimal notation. This is a mandatory argument.
IPto

Last IP address in the range, in dotted decimal notation. This is a mandatory argument.
preferredLocation

String of qualifiers, in dotted notation, describing the geographical location of the IP address range. Each qualifier is more specific than the one that precedes it, as in continent.country.region.city.isp.organization. For example,”NA.US.CA.San Jose.ATT.citrix”.

Note: A qualifier that includes a dot (.) or space ( ) must be enclosed in double quotation marks.

This is a mandatory argument. Maximum Length: 197
longitude

Numerical value, in degrees, specifying the longitude of the geographical location of the IP address-range.

Note: Longitude and latitude parameters are used for selecting a service with the static proximity GSLB method. If they are not specified, selection is based on the qualifiers specified for the location.

Maximum value: 180
latitude

Numerical value, in degrees, specifying the latitude of the geographical location of the IP address-range.

Note: Longitude and latitude parameters are used for selecting a service with the static proximity GSLB method. If they are not specified, selection is based on the qualifiers specified for the location.

Maximum value: 180

To add custom entries by using the configuration utility

Navigate to AppExpert > Location, click the Custom Entries tab, and add the custom entries.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Add custom entries to a static proximity database

September 14, 2021

Contributed by:

S C

September 14, 2021

Contributed by:

S C

Add custom entries to a static proximity database

To add custom entries by using the command line interface

Parameters for adding custom entries

To add custom entries by using the configuration utility

In this article