ADC

Monitor an LLB setup

September 14, 2021

Contributed by:

S C

After the configuration is up and running, you can view the statistics for each service and virtual server to check for possible problems.

View the statistics of a virtual server

To evaluate the performance of virtual servers or to troubleshoot problems, you can display details of the virtual servers configured on the Citrix ADC appliance. You can display a summary of statistics for all the virtual servers. You can also specify the name of a virtual server to display the statistics only for that virtual server. You can display the following details:

Name
IP address
Port
Protocol
State of the virtual server
Rate of requests received
Rate of hits

Display virtual server statistics by using the CLI

To display a summary of the statistics for all the virtual servers currently configured on the Citrix ADC, or for a single virtual server, at the command prompt, type:

stat lb vserver -detail] [<name>]
<!--NeedCopy-->

Example:

stat lb vserver -detail
Virtual Server(s) Summary
                      vsvrIP  port     Protocol        State    Req/s   Hits/s
One                        *    80         HTTP           UP      5/s      0/s
Two                        *     0          TCP         DOWN      0/s      0/s
Three                      *  2598          TCP         DOWN      0/s      0/s
dnsVirtualNS    10.102.29.90    53          DNS         DOWN      0/s      0/s
BRVSERV            10.10.1.1    80         HTTP         DOWN      0/s      0/s
LBVIP           10.102.29.66    80         HTTP           UP      0/s      0/s
 Done
<!--NeedCopy-->

Display virtual server statistics by using the GUI

Navigate to Traffic Management > Load Balancing > Virtual Servers > Statistics.
If you want to display the statistics for only one virtual server, in the details pane, select the virtual server, and click Statistics.

View the statistics of a service

You can view the rate of requests, responses, request bytes, response bytes, current client connections, requests in the surge queue, current server connections, and so forth using the service statistics.

View the statistics of a service by using the CLI

At the command prompt, type:

stat service <name>
<!--NeedCopy-->

Example:

stat service Service-HTTP-1
<!--NeedCopy-->

View the statistics of a service by using the GUI

Navigate to Traffic Management > Load Balancing > Services > Statistics.
If you want to display the statistics for only one service, select the service, and click Statistics.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Monitor an LLB setup

September 14, 2021

Contributed by:

S C

September 14, 2021

Contributed by:

S C

Monitor an LLB setup

View the statistics of a virtual server

Display virtual server statistics by using the CLI

Display virtual server statistics by using the GUI

View the statistics of a service

View the statistics of a service by using the CLI

View the statistics of a service by using the GUI

In this article