ADC

Enabling content filtering

September 14, 2021

Contributed by:

S C

By default, content filtering is enabled on Citrix ADC appliances running the Citrix ADC operating system 8.0 or above. If you are upgrading an existing appliance from an operating system version earlier than 8.0, you must update the licenses before you can use content filtering, and you might need to enable the content filtering feature itself manually.

Enable content filtering by using the CLI

At the command prompt, type the following commands to enable content filtering and verify the configuration:

-  enable ns feature ContentFiltering
-  show ns feature
<!--NeedCopy-->

Example:

> enable ns feature ContentFiltering
 Done
> show ns feature

        Feature                        Acronym              Status
        -------                        -------              ------
 1)     Web Logging                    WL                   ON
 2)     Surge Protection               SP                   OFF
 .
 .
 .
 .
 11)    Http DoS Protection            HDOSP                OFF
 12)    Content Filtering              CF                   ON
 .
 .
 23)    HTML Injection                 HTMLInjection        ON
 24)    Citrix ADC Push                 push                 OFF
 Done
<!--NeedCopy-->

Enable content by filtering by using the GUI

In the navigation pane, expand System, and then select Settings.
In the details pane, click Configure basic features.
In the Configure Basic Features pane, select the Content Filter check box, and then click OK.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Enabling content filtering

September 14, 2021

Contributed by:

S C

September 14, 2021

Contributed by:

S C

Enabling content filtering

Enable content filtering by using the CLI

Enable content by filtering by using the GUI

In this article